Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for PR6423/13R-040 CON021
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for PR6423/13R-040 CON021
-
Manufacturer:Epro
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:PR6423/13R-040 CON021
-
Estimated shipping dimensions:18x18x4cm
-
Weight:0.25 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Sensor:PR6423 8 mm eddy-current sensor
-
Sensor Thread:3/8-24 UNF
-
Sensor Mount:Reverse mount
-
Sensor Cable:Armored
-
Adapter Plug:Included at 1 m
-
Total Cable Length:10 m
-
Cable End:Lemo connector
-
Converter:CON021 panel mount
-
Linear Measuring Range:2 mm / 80 mils
-
Nominal Scale Factor:8 V/mm (203.2 mV/mil)
-
CON021 Frequency Range:0 to 20 kHz (-3 dB)
-
CON021 Protection:IP20
Information
Overview
Manuals
Common Applications
Product Precautions
EPRO PR6423/13R-040 CON021 provides a complete eddy-current signal path from the reverse-mounted probe tip to a panel-mounted converter output.
- Uses an armored reverse-mount PR6423 sensor with 3/8-24 UNF case thread.
- Provides a 10 m total sensor cable with adapter plug and Lemo termination.
- Pairs the 2 mm measuring-range sensor with the CON021 panel-mount converter.
- Supports non-contact displacement and speed-related measurements on critical machinery.
The sensor geometry, total cable length and converter calibration operate as one measurement chain. Target material, initial gap, supply wiring and converter output must be checked together during commissioning.
Important Notice: Use PR6423/13R-040 only with the documented connector and converter arrangement; do not transfer calibration data from a different PR6423 cable or mounting code.
EPRO PR6423/13R-040 CON021 Manuals & Downloads
EPRO PR6423/13R-040 CON021 Technical Reference (PDF)EPRO PR6423/13R-040 CON021 Installation & Commissioning Guide (PDF)
The Technical Reference organizes the exact ordering identity, applicable characteristics and system boundary for this eddy current system. The Installation & Commissioning Guide covers identification, pre-installation checks, connections, functional verification and the acceptance record.
Radial shaft vibration
Measure dynamic shaft displacement on turbines, compressors, pumps and fans.
Axial position
Track thrust-position change against a qualified steel target.
Eccentricity monitoring
Observe low-speed shaft bow and eccentricity through the eddy-current signal.
Speed or key events
Detect shaft events when the mechanical target and monitoring channel are designed for timing use.
Verify the complete EPRO PR6423/13R-040 CON021 identity and installed measurement path before work.
1
Verify the complete PR6423/13R-040 CON021 identity before installation.
2
Confirm the 3/8-24 UNF reverse-mount geometry and available sensor clearance.
3
Preserve the armored cable and the 10 m total electrical length.
4
Keep the one-metre adapter-plug position and Lemo termination free from strain.
5
Mount CON021 with the supplied M5 hardware in a protected panel environment.
6
Wire the documented negative supply and output terminals with correct polarity.
7
Set the initial gap against the actual target and observe the converter output range.
8
Verify static gap, dynamic waveform, channel scaling and the machine acceptance record.
Technical notes
Secure the Lemo connection and panel-mounted CON021 separately so vibration or cable pull cannot change the reverse-mount probe gap.
FAQ View All FAQ
-
What mounting style is used by EPRO PR6423/13R-040 CON021?The R code identifies a reverse-mount PR6423 sensor.
-
Which thread is used on EPRO PR6423/13R-040 CON021?The PR6423/13 family uses a 3/8-24 UNF case thread.
-
Is the sensor cable armored on EPRO PR6423/13R-040 CON021?Yes. The 13 prefix selects the armored execution for the reverse-mount sensor.
-
What cable arrangement belongs to EPRO PR6423/13R-040 CON021?The 040 suffix selects an adapter plug, 10 m total cable length and Lemo converter connection.
-
Which converter is paired with EPRO PR6423/13R-040 CON021?CON021 is the compatible panel-mount eddy-current signal converter.
-
What measuring range applies to EPRO PR6423/13R-040 CON021?The documented linear measuring range is 2 mm, equivalent to 80 mils.
-
What does CON021 provide in EPRO PR6423/13R-040 CON021?It powers and conditions the sensor signal and provides the proportional voltage output for the monitoring channel.
-
What confirms commissioning of EPRO PR6423/13R-040 CON021?Confirm exact identity, cable routing, supply polarity, initial gap, converter output, dynamic response and receiving-channel scaling.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.