Which installed hardware must be paired with PR9268-302-100?

Use PR9268-302-100 with the documented PR9268 horizontal case-seismic measurement components: A6120 case-seismic monitor, Rigid horizontal mounting surface, Eight-metre cable route.

How should the Measuring orientation value for PR9268-302-100 be verified?

Confirm the complete nameplate and order code before work; the documented measuring orientation is Horizontal; up to 100 degC.

What connection detail is critical when installing PR9268-302-100?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing PR9268-302-100?

Retain the as-found position, cable construction, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can PR9268-302-100 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved PR9268 horizontal case-seismic measurement configuration.

Emerson PR9268-302-100 PR9268 electrodynamic velocity sensor

Name: PR9268-302-100
Brand: Emerson
SKU: PR9268-302-100

PR9268-302-100

PR9268 electrodynamic velocity sensor

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for PR9268-302-100

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

PR9268-302-100

Estimated shipping dimensions:

18x18x8cm

Weight:

0.75 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Measuring orientation:

Horizontal; up to 100 degC

Cable construction:

Armored

Cable length:

8 m

Cable termination:

Open ends

Frequency range:

4 to 1000 Hz

Natural frequency:

4.5 +/-0.75 Hz at 20 degC

Sensitivity:

28.5 mV/(mm/s) +/-5%

Damping:

0.56 at 20 degC; 0.42 at 100 degC

Measuring-circuit resistance:

1875 Ohm +/-10%

Insulation resistance:

>1 MOhm at 500 V AC

Inductance:

<90 mH

Capacitance to housing:

<1.2 nF including cable

Maximum lifting/sinking current:

1.8 mA

Operating temperature:

-20 to +100 degC

Ingress protection:

IP55

Minimum cable bend radius:

35 mm

Information

Overview Manuals Common Applications Product Precautions

Emerson PR9268-302-100 is pr9268 electrodynamic velocity sensor. It converts horizontal absolute vibration velocity into a self-powered signal over an eight-metre armored connection.

Configured for horizontal installation
Extends the armored connection to eight metres
Maintains 4 to 1000 Hz measurement bandwidth
Provides an open-ended field cable

PR9268-302-100 operates with A6120 case-seismic monitor, Rigid horizontal mounting surface, Eight-metre cable route, Shielded field termination.

Engineered applications include Remote horizontal bearing points, Large compressor case monitoring, Gearbox foundation vibration, Long-route turbine instrumentation.

Important Notice: Verify the longer eight-metre route, horizontal axis, cable support and conductor identity; commission with controlled machine speed and recorded channel response.

Apter Power PR9268-302-100 Manuals and Guides

Apter Power PR9268-302-100 Measurement-System Technical Reference PDF Apter Power PR9268-302-100 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Remote horizontal bearing points

Reaches remote bearing housings without a separate extension cable.

Large compressor case monitoring

Measures horizontal absolute velocity for machine protection.

Gearbox foundation vibration

Supports monitoring where cabinet distance requires an eight-metre lead.

Long-route turbine instrumentation

Feeds case-motion trends to the installed protection platform.

Read the applicable Emerson machinery-monitoring instructions before work. Verify PR9268-302-100 and the installed PR9268 horizontal case-seismic measurement configuration.

Confirm the full PR9268-302-100 marking, horizontal measuring orientation and assigned machine location before removal.

Place the monitored machine and protection logic in the approved maintenance state before sensor work.

Use the three M6 through bores or M4 blind-hole threads without exceeding the documented 10 mm blind-thread depth.

Support the 8 m armored cable and maintain at least the documented 35 mm bending radius.

Preserve the measuring axis and housing contact surface; do not introduce tilt, rocking or loose mounting.

Identify both open-ended cable conductors and preserve shield and polarity continuity to the monitor channel.

Measure the sensor circuit and insulation condition before reconnecting it to the monitoring input.

Run the machine under controlled conditions and verify velocity response, phase behavior and alarm logic.

FAQS

What measurement or system function does PR9268-302-100 perform?

PR9268-302-100 is a pr9268 electrodynamic velocity sensor. It converts horizontal absolute vibration velocity into a self-powered signal over an eight-metre armored connection.
Which installed hardware must be paired with PR9268-302-100?

Use PR9268-302-100 with the documented PR9268 horizontal case-seismic measurement components: A6120 case-seismic monitor, Rigid horizontal mounting surface, Eight-metre cable route.
How should the Measuring orientation value for PR9268-302-100 be verified?

Confirm the complete nameplate and order code before work; the documented measuring orientation is Horizontal; up to 100 degC.
What connection detail is critical when installing PR9268-302-100?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is PR9268-302-100 mechanically installed without changing measurement behavior?

Use the three M6 through bores or M4 blind-hole threads without exceeding the documented 10 mm blind-thread depth.
What commissioning test should be completed for PR9268-302-100?

Run the machine under controlled conditions and verify velocity response, phase behavior and alarm logic.
What configuration record should be retained when replacing PR9268-302-100?

Retain the as-found position, cable construction, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can PR9268-302-100 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved PR9268 horizontal case-seismic measurement configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

PR9268-302-100

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for PR9268-302-100

Technical specifications for PR9268-302-100

Information

Information