Emerson PR6423/00R-101 CON031 is an evidence-bounded 8 mm reverse-mount eddy current sensor and CON031 measuring-chain configuration in the Bailey INFI 90 / Harmony Rack installed-base context. Emerson's current PR6423 ordering matrix decodes PR6423/00R-101 as an M10x1, non-armored, reverse-mount 8 mm sensor without an adapter plug, with 4.0 m cable and an open cable end. Emerson's CON021/CON031 guide states that CON031 uses screw terminals for transducers without a connector and supports PR6422 through PR6426 measuring chains.
- Exact sensor code: PR6423/00R-101
- Sensor configuration: M10x1; non-armored; reverse mount; no adapter plug; 4.0 m cable; open cable end
- Signal converter: CON031 screw-terminal converter for sensors without connector
- Linear measuring range: 2 mm (80 mils)
System role: The calibrated sensor and CON031 converter measure static and dynamic distance, including axial displacement, radial vibration, position, eccentricity and speed-related key pulses on rotating machinery. The page publishes only functions and ratings stated by the cited Emerson material; sibling and successor data are not transferred. Architecture boundary: Sensor and converter are adjusted and delivered as a measuring chain; keep the matched sensor/converter identity, material calibration, supply and output range together. Exact cable, termination, firmware, revision and host dependencies must be checked against the physical assembly and approved project drawings. For maintenance, migration or replacement work, verify identity, companion hardware, wiring, addressing, power, network settings and commissioning tests before returning the loop or node to service. Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact Emerson evidence.
Important Notice: Verify the complete Emerson PR6423/00R-101 CON031 nameplate, revision and installed-system documentation before use.
Apter Power PR6423/00R-101 CON031 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Emerson official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Emerson documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Emerson PR6423/00R-101 CON031.
System documentationProvides a source-traceable boundary for rack, network, I/O and termination records.
Commissioning reviewGuides pre-power checks, companion-module verification and controlled functional testing.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Emerson documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Emerson PR6423/00R-101 CON031 nameplate, revision and installed-system documentation before use.
2Do not substitute a LEMO-ended sensor for this open-ended CON031 connection, and do not treat a family-level hazardous-area approval as approval for the installed pair without checking both labels.
3De-energize and follow the site's approved electrical and process-safety procedure before disturbing hardware or field wiring.
4Back up controller, network, I/O, addressing and configuration data before replacement or firmware work.
5Verify every companion module, termination unit, cable, connector and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented loop, network or functional test and confirm alarms and fail states after work.
8Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact Emerson evidence.
Videos
News
Applications
