What does Emerson PR6424/006-131 CON041 measure?

It forms a non-contact eddy-current measurement chain for shaft displacement, position and vibration measurements on compatible ferromagnetic targets.

What sensor diameter applies to Emerson PR6424/006-131 CON041?

The PR6424 sensor has a 16 mm sensing diameter.

What static range is specified for Emerson PR6424/006-131 CON041?

The standard PR6424 chain provides a ±2.0 mm static measurement range.

What sensitivity applies to Emerson PR6424/006-131 CON041?

The specified sensitivity is 4 V/mm on a 42CrMo4 steel target.

What center air gap is used with Emerson PR6424/006-131 CON041?

The nominal center air gap is approximately 2.7 mm for the standard target material.

What temperature range applies to the PR6424 sensor in Emerson PR6424/006-131 CON041?

The sensor operating range is -35 to +150 °C.

What is the CON041 role in Emerson PR6424/006-131 CON041?

CON041 is the DIN-rail signal converter that conditions the PR6424 eddy-current sensor signal over a 0 to 20 kHz frequency range.

How should Emerson PR6424/006-131 CON041 be checked after installation?

Verify the exact sensor, cable and converter pairing, target material, mechanical gap, bias condition and controlled displacement response before service release.

PR6424/006-131 CON041

Name: PR6424/006-131 CON041
Brand: Emerson
SKU: PR6424/006-131 CON041

Eddy-Current Sensor

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Emerson PR6424/006-131 CON041 identifies a PR6424 16 mm eddy-current sensor paired with the CON041 signal-converter family. The documented PR6424 standard chain provides a ±2.0 mm static range and 4 V/mm sensitivity on 42CrMo4 steel.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for PR6424/006-131 CON041

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for PR6424/006-131 CON041

Manufacturer:

Emerson
Product Category:

Machinery Monitoring Systems
Spare Part Number:

PR6424/006-131 CON041
Estimated shipping dimensions:

18×16×3cm
Weight:

0.35 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Sensor principle:

Eddy current, non-contact
Sensor diameter:

16 mm
Static range:

±2.0 mm
Recommended dynamic range:

0 to 1000 µm peak-to-peak
Sensitivity:

4 V/mm on 42CrMo4 steel
Nominal center air gap:

Approximately 2.7 mm
Sensor operating temperature:

-35 to +150 °C
Target material:

Ferromagnetic steel; 42CrMo4 standard
Converter family:

CON041 DIN-rail signal converter
Converter frequency range:

0 to 20,000 Hz (-3 dB)
Standard converter range for PR6424:

4.0 mm

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Emerson PR6424/006-131 CON041 is handled as one calibrated sensor-converter chain whose probe identity, cable path, target material and converter pairing must remain together.

16 mm non-contact eddy-current sensing
±2.0 mm static measurement range
4 V/mm sensitivity on 42CrMo4 steel
CON041 DIN-rail converter with 0-20 kHz response

Retain the exact host position, connections and configuration record. Complete controlled diagnostics and a functional test before service release.

Important Notice: Confirm PR6424/006-131 CON041, every companion marking and the recorded acceptance result before replacement.

Emerson PR6424/006-131 CON041 Manuals & Downloads

Emerson PR6424/006-131 CON041 Technical Reference (PDF)Emerson PR6424/006-131 CON041 Installation & Commissioning Guide (PDF)

The technical reference consolidates product identity and interface data; the installation guide provides separate readiness, configuration, verification and handover checks.

Exact-position replacement

Matches PR6424/006-131 CON041 to the recorded host, position and companion hardware before changeout.

Interface restoration

Rebuilds the documented power, signal, keying and protective interfaces for PR6424/006-131 CON041.

Configuration-controlled service

Restores assignments and settings from the approved record instead of borrowing them from a neighboring device.

Acceptance and handover

Confirms diagnostics and a controlled functional response from PR6424/006-131 CON041 before release.

Read the applicable product and site instructions before work. Verify PR6424/006-131 CON041, the installed host and every connected interface before isolation or replacement.

Confirm the complete PR6424/006-131 CON041 marking and documented hardware role before work.

Place the connected process and controller hardware in the approved maintenance state.

Record the host position, companion parts, cable direction, terminal assignments and active configuration.

Isolate every documented power, signal and stored-energy source before disconnecting hardware.

Protect keyed connectors, electronic contacts and labeled field conductors during handling.

Restore only the recorded power, wiring, grounding, shielding and configuration arrangement.

Energize in a controlled sequence and review device, carrier, controller and field diagnostics.

Function-test non-contact measurement of shaft displacement, position, eccentricity or speed/key motion and retain the acceptance record before service release.

Technical notes

Use PR6424/006-131 CON041 only in the documented AMS Machinery Health Measurement Chain execution. Preserve complete identity, interfaces and configuration, then verify diagnostics and non-contact measurement of shaft displacement, position, eccentricity or speed/key motion under controlled conditions.

FAQ View All FAQ

What does Emerson PR6424/006-131 CON041 measure?

It forms a non-contact eddy-current measurement chain for shaft displacement, position and vibration measurements on compatible ferromagnetic targets.
What sensor diameter applies to Emerson PR6424/006-131 CON041?

The PR6424 sensor has a 16 mm sensing diameter.
What static range is specified for Emerson PR6424/006-131 CON041?

The standard PR6424 chain provides a ±2.0 mm static measurement range.
What sensitivity applies to Emerson PR6424/006-131 CON041?

The specified sensitivity is 4 V/mm on a 42CrMo4 steel target.

What center air gap is used with Emerson PR6424/006-131 CON041?

The nominal center air gap is approximately 2.7 mm for the standard target material.
What temperature range applies to the PR6424 sensor in Emerson PR6424/006-131 CON041?

The sensor operating range is -35 to +150 °C.
What is the CON041 role in Emerson PR6424/006-131 CON041?

CON041 is the DIN-rail signal converter that conditions the PR6424 eddy-current sensor signal over a 0 to 20 kHz frequency range.
How should Emerson PR6424/006-131 CON041 be checked after installation?

Verify the exact sensor, cable and converter pairing, target material, mechanical gap, bias condition and controlled displacement response before service release.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.