Which installed hardware must be paired with PR6423-002-030?

Use PR6423-002-030 with the documented Emerson PR6423 8 mm eddy-current measurement system components: CON021 or CON041 signal converter, Conductive steel target, Probe mounting bracket.

How should the Sensor family value for PR6423-002-030 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6423.

What connection detail is critical when installing PR6423-002-030?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing PR6423-002-030?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can PR6423-002-030 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6423 8 mm eddy-current measurement system configuration.

Emerson PR6423-002-030 PR6423 8 mm eddy-current displacement sensor

Name: PR6423-002-030
Brand: Emerson
SKU: PR6423-002-030

PR6423-002-030

PR6423 8 mm eddy-current displacement sensor

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for PR6423-002-030

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

PR6423-002-030

Estimated shipping dimensions:

16x15x4cm

Weight:

0.3 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Sensor family:

PR6423

Sleeve thread:

M10 x 1

Armor:

Probe length Cx:

45 mm

Overall sensor length C:

54 mm

Adapter plug:

Included

Total cable length:

8 m

Cable end:

LEMO

Static nominal range:

+/-1.0 mm

Recommended dynamic range:

50 to 500 um p-p

Sensitivity:

8 V/mm

Nominal distance center:

Approximately 1.5 mm

Basic air gap:

0.4 to 0.7 mm

Operating temperature:

-35 to +180 degC; +200 degC short term

Pressure at sensor head:

10,000 hPa

Vibration endurance:

5 g at 60 Hz

Information

Overview Manuals Common Applications Product Precautions

Emerson PR6423-002-030 is pr6423 8 mm eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.

Uses an M10 x 1 metric sleeve
Provides an eight-metre unarmored lead
Measures over a two-millimetre nominal static span
Terminates in the documented LEMO connection

PR6423-002-030 operates with CON021 or CON041 signal converter, Conductive steel target, Probe mounting bracket, Compatible machinery-monitoring input.

Engineered applications include Radial shaft vibration, Axial thrust position, Shaft centerline trending, Eccentricity measurement.

Important Notice: Confirm the M10 x 1 mounting, 45 mm probe length, eight-metre loop and paired converter calibration; set gap only after the bracket is mechanically secure.

Apter Power PR6423-002-030 Manuals and Guides

Apter Power PR6423-002-030 Measurement-System Technical Reference PDF Apter Power PR6423-002-030 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Radial shaft vibration

Tracks journal motion relative to the bearing housing.

Axial thrust position

Observes axial shaft displacement at a thrust collar.

Shaft centerline trending

Supports slow-roll and operating centerline analysis.

Eccentricity measurement

Captures once-per-turn shaft bow or eccentric motion.

Read the applicable Emerson machinery-monitoring instructions before work. Verify PR6423-002-030 and the installed Emerson PR6423 8 mm eddy-current measurement system configuration.

Verify the complete PR6423-002-030 order code, M10 x 1 mounting interface and assigned PR6423 8 mm eddy-current system measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing PR6423-002-030.

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.

Route the 8 m sensor lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep the LEMO or open-end connection clean, dry and fully identified before reconnecting the measurement loop.

Confirm the paired signal converter or monitor input, cable length and target material match the documented measuring chain.

Set the static gap within the documented linear region while preserving shaft and probe mechanical clearance.

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.

FAQS

What measurement or system function does PR6423-002-030 perform?

PR6423-002-030 is a pr6423 8 mm eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.
Which installed hardware must be paired with PR6423-002-030?

Use PR6423-002-030 with the documented Emerson PR6423 8 mm eddy-current measurement system components: CON021 or CON041 signal converter, Conductive steel target, Probe mounting bracket.
How should the Sensor family value for PR6423-002-030 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6423.
What connection detail is critical when installing PR6423-002-030?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is PR6423-002-030 mechanically installed without changing measurement behavior?

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.
What commissioning test should be completed for PR6423-002-030?

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.
What configuration record should be retained when replacing PR6423-002-030?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can PR6423-002-030 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6423 8 mm eddy-current measurement system configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

PR6423-002-030

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for PR6423-002-030

Technical specifications for PR6423-002-030

Information

Information