Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 1X00188H01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 1X00188H01
-
Manufacturer:Emerson
-
Product Category:DCS Systems
-
Spare Part Number:1X00188H01
-
Estimated shipping dimensions:12.2x3.1x3.6cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product class:Molded cavity insert
-
Subsystem:HART high-performance analog output
-
Channel count:4
-
Signal range:4-20 mA
-
Output conversion:16 bit
-
Channel isolation:Galvanically isolated outputs
-
Paired electronics:5X00167G01
-
Installed position:Personality-module cavity
Information
Overview
Manuals
Common Applications
Product Precautions
WESTINGHOUSE 1X00188H01 does not perform the analog conversion itself; it identifies and protects the wiring position used by the high-performance HART output electronics. Replacement work must therefore preserve the exact loop assignment and the 5X00167G01 pairing.
- Molded personality-position insert
- Four 4-20 mA HART output channels
- 5X00167G01 electronics pairing
- High-performance 16-bit output subsystem
The installed signal path is Ovation output command → 5X00167G01 HART electronics → 1X00188H01 wiring insert → Four field current loops. Record the as-left channel assignment and verify the affected path before release.
Important Notice: Place all affected analog outputs in a controlled safe state before handling WESTINGHOUSE 1X00188H01.
WESTINGHOUSE 1X00188H01 Manuals & Downloads
WESTINGHOUSE 1X00188H01 Technical Reference (PDF)WESTINGHOUSE 1X00188H01 Installation & Commissioning Guide (PDF)
The Technical Reference presents the applicable model data and interface details; the Installation & Commissioning Guide organizes field preparation, controlled replacement and acceptance checks for WESTINGHOUSE 1X00188H01.
HART control outputs
Supports the wiring boundary for four smart-device output loops.
Valve or actuator commands
Carries the installed current-loop assignments controlled by the paired electronics.
Cavity-insert replacement
Restores the field-wiring identification and connector protection at the personality position.
Loop commissioning
Provides a visible reference for tracing output channel, return and field-device wiring.
Apply these controls to WESTINGHOUSE 1X00188H01 before isolation, removal, reconnection, energization and release.
1
Place all affected analog outputs in a controlled safe state before handling WESTINGHOUSE 1X00188H01.
2
Verify that the installed electronics module is 5X00167G01 and that the complete H01 insert identity matches.
3
Photograph the insert label and all four loop assignments before disconnecting field wiring.
4
Do not treat the molded insert as an electronics module; keep the associated 5X00167G01 identity in the work record.
5
Preserve channel polarity, shield termination and segregation from switching-power conductors.
6
Inspect the molded guides, label, connector opening and base terminals for damage before installation.
7
Reconnect one loop at a time and verify current direction before enabling the output command.
8
Commission each used channel with commanded 4-20 mA points and confirm HART communication where the field device uses it.
Technical notes
WESTINGHOUSE 1X00188H01 is a molded cavity insert for the four-channel Ovation high-performance HART analog-output subsystem using 4-20 mA signals.
FAQ View All FAQ
-
What is WESTINGHOUSE 1X00188H01?It is the molded cavity insert used in the personality-module position of a high-performance HART analog-output subsystem.
-
How many loops are associated with WESTINGHOUSE 1X00188H01?The applicable subsystem has four analog-output channels.
-
Which output range applies to WESTINGHOUSE 1X00188H01?The field loops use 4-20 mA signals.
-
Which electronics module pairs with WESTINGHOUSE 1X00188H01?The documented pairing is 5X00167G01.
-
Does WESTINGHOUSE 1X00188H01 perform digital-to-analog conversion?No. The molded insert occupies the wiring-label position; the paired electronics module performs the output conversion.
-
What must be recorded before removing WESTINGHOUSE 1X00188H01?Record the complete insert and electronics identities, four loop assignments, polarities, shields and safe output states.
-
How should a field loop be checked after installing WESTINGHOUSE 1X00188H01?Command representative current points and verify measured loop current, field-device response and HART communication when used.
-
Can WESTINGHOUSE 1X00188H01 be replaced by any cavity insert?No. The insert must match the documented four-channel HART output subsystem and the installed 5X00167G01 electronics.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.