Which installed system position is intended for KJ3224X1-BA2?

Install KJ3224X1-BA2 only in the documented Emerson DeltaV M-series traditional I/O position and compare the complete catalog marking with the approved hardware list.

What field signals or controlled function does KJ3224X1-BA2 handle?

Its documented role is eight thermocouple or low-level millivolt input signals; preserve the assigned channel, network or controller function during service.

Which companion hardware must be matched to KJ3224X1-BA2?

Match KJ3224X1-BA2 with DeltaV M-series I/O carrier and CJC-compatible terminal block, including the documented rack, cable and project identity.

Which electrical rating must be checked before wiring KJ3224X1-BA2?

Verify input channels: 8. Do not transfer limits from another catalog number.

What configuration should be recorded before replacing KJ3224X1-BA2?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved Emerson DeltaV M-series traditional I/O configuration.

Which isolation and handling controls apply to KJ3224X1-BA2?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling KJ3224X1-BA2.

How should an engineer commission KJ3224X1-BA2?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended furnace temperature acquisition function.

Can KJ3224X1-BA2 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Emerson KJ3224X1-BA2 DeltaV M-series eight-channel thermocouple and millivolt input card

Name: KJ3224X1-BA2 13P0137X022
Brand: Emerson
SKU: 13P0137X022

KJ3224X1-BA2 13P0137X022

DeltaV M-series eight-channel thermocouple and millivolt input card

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for KJ3224X1-BA2 13P0137X022

Manufacturer:

Emerson

Product Category:

DCS System

Spare Part Number:

13P0137X022

Estimated shipping dimensions:

4.1x13x13cm

Weight:

0.25 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Input channels:

Input types:

Thermocouple and low-level millivolt

Thermocouple types:

B, E, J, K, N, R, S, T

Uncharacterized input range:

-100 to +100 mV

A/D resolution:

16 bit

Repeatability:

0.05% of span

Common-mode rejection:

120 dB at DC, 50 Hz and 60 Hz

Common-mode impedance:

>10 Mohm

Normal-mode rejection:

60 dB at 60 Hz

Open-sensor detection:

Yes; less than 70 nA; 10 s

Local bus power:

12 V DC nominal, 210 mA

Factory isolation test:

1500 V DC

Isolation groups:

Channels 1-4 and channels 5-8

Temperature units:

degC or degF

Card key:

Information

Overview Manuals Common Applications Product Precautions

Emerson KJ3224X1-BA2 is deltav m-series eight-channel thermocouple and millivolt input card. It converts eight thermocouple or low-level millivolt signals into temperature and process measurements for a DeltaV controller.

Accepts eight thermocouple or millivolt inputs
Supports eight characterized thermocouple types
Provides two isolated four-channel groups
Detects open sensors for channel diagnostics

KJ3224X1-BA2 operates with DeltaV M-series I/O carrier, CJC-compatible terminal block, field thermocouples or millivolt sources, DeltaV control database.

Engineered applications include Furnace temperature acquisition, Reactor multi-point temperature monitoring, Millivolt transmitter integration, M-series I/O replacement.

Important Notice: Verify KJ3224X1-BA2 and part number 13P0137X022, card key C1, CJC method, thermocouple type, polarity and isolated channel grouping before removal; after installation, prove open-sensor diagnostics and every configured temperature point.

Apter Power Emerson KJ3224X1-BA2 Manuals and Guides

Apter Power Emerson KJ3224X1-BA2 Product and System Technical Reference PDF Apter Power Emerson KJ3224X1-BA2 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Furnace temperature acquisition

Collects multiple thermocouple measurements for thermal-process control.

Reactor multi-point temperature monitoring

Monitors distributed vessel or reactor temperature points.

Millivolt transmitter integration

Acquires documented low-level voltage sources without an external converter.

M-series I/O replacement

Restores the exact card position while preserving channel and CJC assignments.

Read the applicable Emerson instructions before work. Verify KJ3224X1-BA2 and the installed Emerson DeltaV M-series traditional I/O configuration.

Verify the complete KJ3224X1-BA2 marking and its assigned Emerson DeltaV M-series traditional I/O position before work.

Place the connected furnace temperature acquisition process in the approved maintenance state.

Isolate applicable power and eight thermocouple or low-level millivolt input signals field energy before disconnecting conductors.

Record connector, conductor, address, firmware and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed DeltaV M-series I/O carrier and CJC-compatible terminal block against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended reactor multi-point temperature monitoring function and retain the final test result.

FAQS

Which installed system position is intended for KJ3224X1-BA2?

Install KJ3224X1-BA2 only in the documented Emerson DeltaV M-series traditional I/O position and compare the complete catalog marking with the approved hardware list.
What field signals or controlled function does KJ3224X1-BA2 handle?

Its documented role is eight thermocouple or low-level millivolt input signals; preserve the assigned channel, network or controller function during service.
Which companion hardware must be matched to KJ3224X1-BA2?

Match KJ3224X1-BA2 with DeltaV M-series I/O carrier and CJC-compatible terminal block, including the documented rack, cable and project identity.
Which electrical rating must be checked before wiring KJ3224X1-BA2?

Verify input channels: 8. Do not transfer limits from another catalog number.
What configuration should be recorded before replacing KJ3224X1-BA2?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved Emerson DeltaV M-series traditional I/O configuration.
Which isolation and handling controls apply to KJ3224X1-BA2?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling KJ3224X1-BA2.
How should an engineer commission KJ3224X1-BA2?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended furnace temperature acquisition function.
Can KJ3224X1-BA2 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

KJ3224X1-BA2 13P0137X022

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for KJ3224X1-BA2 13P0137X022

Technical specifications for KJ3224X1-BA2 13P0137X022

Information

Information