The 792414506-04 identifier is presented as an OEM vibration-transmitter spare-part code. The exact original manufacturer, measurement range, output, cable configuration, approvals, and lifecycle status are not identifiable from the public Baker Hughes/Bently Nevada documentation reviewed for this page.
- Exact OEM code 792414506-04
- Vibration transmitter - confirmation required
- Not publicly confirmed
- Not publicly confirmed
A vibration transmitter normally conditions a vibration-sensor signal for a machinery control or monitoring input; however, no signal type, scaling, compatible controller, or installation limit is assigned to 792414506-04 here because those details require the physical nameplate and the machine-specific OEM order record. For dependable measurement, follow official system-matching, target, mounting, wiring, environmental, and approval instructions.
Important Notice: Public model-specific data are unavailable; the physical nameplate and official OEM documentation are required before substitution or installation.
Apter Power 792414506-04 Product Manual
Important Notice: This Apter Power manual is prepared from the manufacturer source identified on the product page. Confirm the physical nameplate, current original-manufacturer documents, and applicable certification before installation or replacement.
OEM Machinery PackagesVerify the exact code against the original machine bill of material.
Vibration MonitoringConfirm the measurement signal and scaling before connection.
Control-System InputMatch output type, supply, and channel configuration from official documentation.
Replacement EngineeringCompare manufacturer, range, cable, connector, and approvals to the installed unit.
Cryogenic Rotating EquipmentUse only when the machine OEM confirms this exact part code for the equipment serial number.
Nameplate-Controlled MaintenanceTreat the physical nameplate as the controlling identification source.
Read and follow Manufacturer nameplate and OEM order documentation required; no exact public Baker Hughes/Bently Nevada datasheet entry was located and the applicable installation instructions before use. Verify the exact ordering code from the physical nameplate.
1Do not connect power until the nameplate voltage, current, polarity, and wiring are verified.
2Do not configure an analog input until the transmitter range and output scaling are confirmed.
3Do not assume Bently Nevada manufacture or compatibility from the part number alone.
4Verify cable length, connector, mounting, environmental rating, and approvals from the official OEM file.
5Use the machine serial number and original bill of material for replacement authorization.
Videos
News
Applications
