Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330876-02-10-00-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330876-02-10-00-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330876-02-10-00-00
-
Estimated shipping dimensions:6.4x6.4x117cm
-
Weight:0.46 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe body thread:M14 x 1.5
-
Integral lead length:1.0 m
-
Cable execution:High-temperature FluidLoc without armor
-
Agency approval option:None
-
Nominal target material:AISI 4140 steel
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330876-02-10-00-00 is an M14 x 1.5 3300 XL 50 mm proximity probe. It measures large shaft or structural displacement through a matched 50 mm transducer system.
- Measures very large static or dynamic displacement without contact
- Forms the probe element of a matched 50 mm transducer system
- Uses high-temperature FluidLoc cable at the probe connection
- Provides the displacement signal to a compatible monitoring channel
330876-02-10-00-00 installs with 3300 XL 50 mm Proximitor Sensor, matched extension cable, compatible displacement monitor, AISI 4140 target in an engineered 3300 XL 50 mm Proximity Transducer System configuration.
The commissioning workflow covers installed-hardware matching, controlled start-up and functional verification for this 3300 xl 50 mm proximity probe.
Important Notice: Confirm the complete 330876-02-10-00-00 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.
Apter Power 330876-02-10-00-00 Manuals and Guides
Apter Power 330876-02-10-00-00 Product Technical Reference PDFBently Nevada 330876-02-10-00-00 Official Manual PDF
The first document is an Apter Power model-specific technical reference. The second supports model-specific installation, configuration and engineering verification.
Large-range shaft positionMeasures very large static or dynamic displacement without contact
Turbine differential expansionForms the probe element of a matched 50 mm transducer system
Structural displacement monitoringUses high-temperature FluidLoc cable at the probe connection
Large-clearance thrust-position measurementProvides the displacement signal to a compatible monitoring channel
Read the applicable Bently Nevada installation instructions before work. Verify 330876-02-10-00-00 and the installed 3300 XL 50 mm Proximity Transducer System configuration.
1Verify 330876-02-10-00-00 and the M14 x 1.5 mounting execution.
2Secure the machine and place the displacement channel in maintenance state.
3Protect the large probe tip and mounting thread from impact.
4Confirm target material, area, and travel cover the engineered measurement range.
5Route the high-temperature FluidLoc lead away from abrasion and tensile load.
6Use only the matched 50 mm extension cable and Proximitor Sensor.
7Check static position across the expected mechanical travel.
8Prove polarity, scaling, alarms, and trip action before service.
Technical notes
Use the complete 50 mm matched transducer set, maintain the specified target geometry, route the 1 m FluidLoc lead within its temperature limits, and verify scale and gap over the required range.
FAQ View All FAQ
-
What isolation is required before installing 330876-02-10-00-00?Place large-range shaft position in the approved maintenance state, isolate every applicable power, signal, and stored-energy source, and prove the work area safe.
-
Which configuration check is essential when commissioning 330876-02-10-00-00?Restore only the approved model-specific channel, range, address, scale, or interface settings and compare them with the physical installation before enabling the process function.
-
How can an engineer function-test 330876-02-10-00-00 after installation?Apply a controlled input, reference, or limited output appropriate to 3300 xl 50 mm proximity probe, observe the system indication and diagnostics, and confirm the intended process response.
-
What should be checked if 330876-02-10-00-00 reports an unstable or incorrect value?Check seating, supply, grounding, shielding, matched components, mechanical installation, and the signal path before changing configuration or replacing additional hardware.
-
Can 330876-02-10-00-00 be replaced by a visually similar model without review?No. Verify the complete part number, electrical execution, connector arrangement, companion hardware, and approved software or rack configuration.
-
What commissioning evidence should be retained for 330876-02-10-00-00?Retain the full 330876-02-10-00-00 identity, as-left wiring and settings, measured functional-test results, final diagnostics, and authorization to return the affected equipment to service.
-
Which installed hardware must be matched before fitting 330876-02-10-00-00?Match the complete 330876-02-10-00-00 marking to 3300 XL 50 mm Proximitor Sensor and matched extension cable, then confirm the assigned 3300 XL 50 mm Proximity Transducer System position and approved system configuration.
-
How should the field connections for 330876-02-10-00-00 be recorded before replacement?Record terminal or connector identity, polarity, shield, cable tag, channel assignment, and the as-found diagnostic state before disconnecting 330876-02-10-00-00.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.