Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 3500/22M 147364-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 3500/22M 147364-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:147364-01
-
Estimated shipping dimensions:2.3x11x24cm
-
Weight:0.4 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
System:3500 Machinery Protection System
-
Module function:Buffered signal output
-
Associated interface:3500/22M TDI
-
Diagnostic panel:3500/08
-
Access role:External buffered monitor signals
-
Installation:Optional second rear I/O module
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 147364-01 is a 3500 Buffered Signal Output Module used in the documented 3500/22M diagnostic-access arrangement. It provides buffered monitor signals to external diagnostic connections such as a 3500/08 Diagnostics Access Panel.
- Buffered monitor-signal access
- Optional second I/O position at the TDI
- 3500/08 diagnostic-panel support
- External diagnostic-equipment connection
Install 147364-01 only in the documented rear I/O position between the power-input modules and the TDI network I/O. Record every source channel and external destination, then compare each buffered output with the corresponding monitor signal before release.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 147364-01 Manuals and Guides
Apter Power 147364-01 Product Technical ReferenceBently Nevada 3500/08 Diagnostics Access Panel Datasheet 141529 Rev. F
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
3500/08 signal access
Feeds documented rack monitor signals to the external diagnostics access panel.
Portable diagnostic connection
Makes buffered signals available to approved analysis equipment.
Commissioning comparison
Allows a controlled external comparison with the corresponding rack monitor channel.
Installed-base TDI diagnostics
Supports the optional buffered-output path in a 3500/22M arrangement.
Read the applicable Bently Nevada documentation before work. Verify 147364-01 from the physical marking and the installed system record.
1
Verify 147364-01 from the physical rear-module marking.
2
Record the rack, slot and TDI network I/O position before removal.
3
Install it only in the optional buffered-output location documented for the TDI arrangement.
4
Label every buffered channel and external cable destination.
5
Preserve the rack Signal Common and chassis-ground configuration.
6
Do not treat the buffered diagnostic path as a replacement for the protection path.
7
Compare each used output with its source monitor channel and expected waveform.
8
Resolve channel swaps, noise or grounding differences before service release.
Technical notes
Install 147364-01 only in the documented rear I/O position between the power-input modules and the TDI network I/O. Record every source channel and external destination, then compare each buffered output with the corresponding monitor signal before release.
FAQ View All FAQ
-
What signal role does 147364-01 perform?It provides buffered machinery-monitor signals for external diagnostic access in the 3500 rack.
-
Where is 147364-01 installed in a 3500/22M arrangement?The TDI supports an optional second I/O module between the Power Input Modules and the primary TDI network I/O.
-
Why is 147364-01 associated with a 3500/08 panel?The official 3500/08 datasheet states that a Buffered Signal Output Module is required with a 3500/22 TDI to expose all buffered signals.
-
How many monitor channels can one 3500/08 panel receive through the 147364-01 arrangement?One 3500/08 can deliver signals from six four-channel monitors and one two-channel Keyphasor Module.
-
What is the 3500/08 cable-length limit relevant to 147364-01?The Diagnostics Access Panel datasheet specifies a maximum cable length of 26 metres or 85 feet.
-
Should 147364-01 be used as a substitute protection output?No. Its documented purpose is buffered diagnostic access; protection functions remain in the configured monitor path.
-
What channel-identification check is essential after replacing 147364-01?Compare every used buffered output with the intended source monitor channel and verify the expected waveform or static signal.
-
Which grounding evidence should be retained for 147364-01?Record rack Signal Common, chassis ground, cable shields, diagnostic-panel ground and any observed potential difference before final connection.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.