Which host hardware must be matched with 330881-16-00-307-06-02?

Match 330881-16-00-307-06-02 with the documented PROXPAC XL Proximity Transducer Assembly and the installed embedded 3300 XL Proximitor Sensor, machine-case mounting boss.

How should the complete 330881-16-00-307-06-02 identification be verified?

Compare the full marking with the controlling 178554 Rev. E record; the documented assembly model is 330881.

Can 330881-16-00-307-06-02 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330881-16-00-307-06-02 code, interfaces, system length or mounting arrangement, and the approved host configuration.

330881-16-00-307-06-02 PROXPAC XL 8 mm proximity transducer assembly

Name: 330881-16-00-307-06-02
Brand: Bently Nevada
SKU: 330881-16-00-307-06-02

330881-16-00-307-06-02

PROXPAC XL 8 mm proximity transducer assembly

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330881-16-00-307-06-02

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330881-16-00-307-06-02

Estimated shipping dimensions:

38.5x9x9cm

Weight:

1.45 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Assembly model:

330881

Probe:

3300 XL 8 mm

Approval option:

Without approvals

Standoff adapter:

None

Probe penetration:

30.7 in (780 mm)

Fittings:

One 3/4-14 NPT fitting; one 3/4-to-1/2 NPT SST reducer; two plugs

Mounting thread:

3/4-14 NPT

Housing rating:

IP66; Type 4X

Housing material:

UV-resistant glass-reinforced conductive PPS

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Supply sensitivity:

<2 mV/V

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

2.0 mm (80 mils)

Linear-range limits:

0.25 to 2.30 mm (10 to 90 mils)

Recommended radial-vibration gap:

-9 V DC; approximately 1.27 mm (50 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB

Extension-cable capacitance:

69.9 pF/m typical

Minimum bend radius:

25.4 mm (1.0 in)

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330881-16-00-307-06-02 is proxpac xl 8 mm proximity transducer assembly. It combines a 3300 XL 8 mm probe, Proximitor Sensor and protective housing so the conditioned signal can be field-wired directly to the monitor.

Sets the documented probe penetration to 30.7 in (780 mm)
Integrates sensing and signal-conditioning hardware in one housing
Provides the selected NPT fitting and reducer arrangement
Supports external probe adjustment in an exposed machine location

330881-16-00-307-06-02 operates with embedded 3300 XL Proximitor Sensor, machine-case mounting boss, three-conductor shielded field cable, compatible monitor channel.

Engineered applications include Harsh-area radial vibration, Externally adjustable axial position, Remote monitor-cabinet wiring, PROXPAC assembly renewal.

Important Notice: Confirm the complete 330881-16-00-307-06-02 code, 30.7 in (780 mm) sleeve penetration, 3/4-14 NPT mounting and fitting orientation before closing the cover and proving enclosure integrity.

Apter Power 330881-16-00-307-06-02 Manuals and Guides

Apter Power 330881-16-00-307-06-02 System and Technical Reference PDF Bently Nevada 330881-16-00-307-06-02 Official Engineering Document PDF

The first document provides model-specific technical and system-reference information. The second is the directly related manufacturer document used for installation, configuration and engineering verification.

Harsh-area radial vibration

Protects the complete proximity measurement at an exposed bearing case.

Externally adjustable axial position

Allows controlled probe adjustment at the installed housing.

Remote monitor-cabinet wiring

Eliminates a separate probe-to-Proximitor extension cable.

PROXPAC assembly renewal

Restores an engineered PROXPAC point without changing its field wiring.

Read the applicable Bently Nevada instructions before work. Verify 330881-16-00-307-06-02 and the installed PROXPAC XL Proximity Transducer Assembly configuration.

Verify 330881-16-00-307-06-02 and the 30.7 in (780 mm) penetration before work.

Place the machine and protection channel in the approved maintenance state.

Preserve the 3/4-14 NPT mounting thread and machine-case sealing surface.

Label power, common, signal and shield conductors before disconnecting the field cable.

Protect the conductive housing, gasket, probe tip and internal electronics from damage.

Confirm target material and monitor scaling before setting the external probe adjustment.

Seal the selected fitting and reducer arrangement without transferring conduit load to the housing.

Verify supply, gap voltage, dynamic response, alarms and cover closure before service.

FAQS

What is the documented system role of 330881-16-00-307-06-02?

330881-16-00-307-06-02 is proxpac xl 8 mm proximity transducer assembly. It combines a 3300 XL 8 mm probe, Proximitor Sensor and protective housing so the conditioned signal can be field-wired directly to the monitor.
Which host hardware must be matched with 330881-16-00-307-06-02?

Match 330881-16-00-307-06-02 with the documented PROXPAC XL Proximity Transducer Assembly and the installed embedded 3300 XL Proximitor Sensor, machine-case mounting boss.
How should the complete 330881-16-00-307-06-02 identification be verified?

Compare the full marking with the controlling 178554 Rev. E record; the documented assembly model is 330881.
What connection check is required before installing 330881-16-00-307-06-02?

Label power, common, signal and shield conductors before disconnecting the field cable.
How should 330881-16-00-307-06-02 be protected during handling?

Protect the conductive housing, gasket, probe tip and internal electronics from damage.
What configuration must be restored after replacing 330881-16-00-307-06-02?

Confirm target material and monitor scaling before setting the external probe adjustment.
What commissioning test is required for 330881-16-00-307-06-02?

Verify supply, gap voltage, dynamic response, alarms and cover closure before service.
Can 330881-16-00-307-06-02 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330881-16-00-307-06-02 code, interfaces, system length or mounting arrangement, and the approved host configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330881-16-00-307-06-02

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330881-16-00-307-06-02

Technical specifications for 330881-16-00-307-06-02

Information

Information