330171-00-08-10-01-05

FAQS

• What engineering function does 330171-00-08-10-01-05 perform in its monitoring loop?
  330171-00-08-10-01-05 detects the changing gap between its probe tip and a conductive rotating target. The matched Proximitor Sensor converts this eddy-current response into a voltage used for static position and dynamic vibration channels.
• Which probe diameter applies to 330171-00-08-10-01-05?
  The configured probe diameter for 330171-00-08-10-01-05 is 5.0 mm.
• What case thread must be checked when specifying 330171-00-08-10-01-05?
  Use 1/4-28 UNF-2A for the case thread when reviewing this complete model.
• How does the case length selection affect 330171-00-08-10-01-05?
  This configuration identifies case length as 0.8 in; include that value in the installation record.
• Which cable length is associated with 330171-00-08-10-01-05?
  The technical value is 1.0 m for the cable length of this model.
• What companion hardware should be confirmed for 330171-00-08-10-01-05?
  Confirm matched bently nevada proximitor sensor, compatible extension cable selected for total system length, threaded mounting bracket or machine probe boss.
• What is the first commissioning check for 330171-00-08-10-01-05?
  Check the 1/4-28 UNF-2A probe thread against the machine bracket before setting the measurement gap.
• Where is 330171-00-08-10-01-05 applied and what signal behavior should the engineer verify?
  It is used on fluid-film bearing machines and on Keyphasor or speed measurement duties where a compact 5 mm sensing element is required. Verify a stable response at the configured monitoring input before releasing the channel.