330130-085-10-00

FAQS

• What engineering function does 330130-085-10-00 perform in its monitoring loop?
  330130-085-10-00 carries the high-frequency probe signal between the proximity probe and Proximitor Sensor. Cable construction and total electrical length are part of the calibrated transducer system.
• Which cable length applies to 330130-085-10-00?
  The configured cable length for 330130-085-10-00 is 8.5 m.
• What cable option must be checked when specifying 330130-085-10-00?
  Use FluidLoc for the cable option when reviewing this complete model.
• How does the agency approval option selection affect 330130-085-10-00?
  This configuration identifies agency approval option as Not required; include that value in the installation record.
• Which system family is associated with 330130-085-10-00?
  The technical value is 3300 XL 8 mm for the system family of this model.
• What companion hardware should be confirmed for 330130-085-10-00?
  Confirm compatible proximity probe, matching proximitor sensor, gold-plated coaxial connector interfaces.
• What is the first commissioning check for 330130-085-10-00?
  Calculate probe length plus 8.5 m cable length against the selected Proximitor Sensor system length.
• Where is 330130-085-10-00 applied and what signal behavior should the engineer verify?
  It is used in vibration and position monitoring installations where the sensor is mounted away from the probe location in a panel or enclosure. Verify a stable response at the configured monitoring input before releasing the channel.