330103-00-16-05-02-05

FAQS

• What engineering function does 330103-00-16-05-02-05 perform in its monitoring loop?
  330103-00-16-05-02-05 detects the changing gap between its probe tip and a conductive rotating target. The matched Proximitor Sensor converts this eddy-current response into a voltage used for static position and dynamic vibration channels.
• Which probe diameter applies to 330103-00-16-05-02-05?
  The configured probe diameter for 330103-00-16-05-02-05 is 8.0 mm.
• What case thread must be checked when specifying 330103-00-16-05-02-05?
  Use M10 x 1 for the case thread when reviewing this complete model.
• How does the unthreaded length selection affect 330103-00-16-05-02-05?
  This configuration identifies unthreaded length as 0 mm; include that value in the installation record.
• Which case length is associated with 330103-00-16-05-02-05?
  The technical value is 160 mm for the case length of this model.
• What companion hardware should be confirmed for 330103-00-16-05-02-05?
  Confirm matched bently nevada proximitor sensor, compatible extension cable selected for total system length, threaded mounting bracket or machine probe boss.
• What is the first commissioning check for 330103-00-16-05-02-05?
  Confirm the M10 x 1 thread and 160 mm case length against the existing metric mounting hardware.
• Where is 330103-00-16-05-02-05 applied and what signal behavior should the engineer verify?
  The M10 x 1 interface serves metric probe brackets on rotating machinery monitoring installations. Verify a stable response at the configured monitoring input before releasing the channel.