Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for AM3100T2-Z2-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for AM3100T2-Z2-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:AM3100T2-Z2-00
-
Estimated shipping dimensions:5.2x2x2cm
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Sensor family:AM3100T2-Z2 accelerometer
-
Monitor family:2300/20 and 2300/25
-
Connection:Two-wire transducer input
-
Connector family:MIL-C-5015 two-pin
-
Mounting interface:1/4-28 mounting hole
-
Cable family:9571 or approved two-wire cable
-
Measurement role:Machine-case vibration
-
Suffix control:-00 retained as supplied
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada AM3100T2-Z2-00 converts machine-case vibration into the electrical input used by a compatible 2300 Series vibration monitor.
- Provides a two-wire accelerometer signal to the 2300 monitor input.
- Uses the AM3100T2-Z2 sensor connection shown for the 2300 Series.
- Mounts through the documented 1/4-28 interface.
- Works with the approved two-wire cable arrangement for the monitor installation.
Sensor mounting stiffness, cable shielding and monitor input configuration affect the measured vibration signal. The -00 suffix remains part of the requested identity without assigning an unsupported option meaning.
Important Notice: Prepare a clean, rigid mounting surface for the 1/4-28 sensor interface. Compare the installed vibration response with a controlled reference before release.
Bently Nevada AM3100T2-Z2-00 Manuals & Downloads
Bently Nevada AM3100T2-Z2-00 Official Technical Reference Excerpt (PDF)Bently Nevada AM3100T2-Z2-00 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Machine-case vibration
Measures casing motion on rotating equipment through an accelerometer input.
2300 Series protection
Feeds a compatible 2300/20 or 2300/25 monitoring channel.
Skid condition monitoring
Provides a compact two-wire vibration signal for packaged machinery.
Maintenance verification
Supports sensor, cable and channel checks after installation or replacement.
Before installing Bently Nevada AM3100T2-Z2-00, confirm the documented system, interfaces and controlled configuration.
1
Confirm the complete AM3100T2-Z2-00 marking and assigned monitor channel before replacement.
2
Prepare a clean, rigid mounting surface for the 1/4-28 sensor interface.
3
Keep the two-pin connector clean and fully engaged.
4
Use the approved two-wire cable and shield arrangement for the installation.
5
Route the cable away from power conductors and sources of mechanical damage.
6
Do not assign an option meaning to the -00 suffix without the matching configuration record.
7
Verify monitor input type, alarm logic and channel scaling before operation.
8
Compare the installed vibration response with a controlled reference before release.
Technical notes
Prepare a clean, rigid mounting surface for the 1/4-28 sensor interface. Compare the installed vibration response with a controlled reference before release.
FAQ View All FAQ
-
Which monitor platform accepts the signal from AM3100T2-Z2-00?The AM3100T2-Z2 sensor is listed for compatible Bently Nevada 2300 Series vibration monitors.
-
What electrical input arrangement is used by AM3100T2-Z2-00?It connects as a two-wire accelerometer input.
-
Which connector family appears on AM3100T2-Z2-00?The sensor drawing identifies a MIL-C-5015 two-pin connector.
-
How is AM3100T2-Z2-00 attached to the machine?Use the documented 1/4-28 mounting interface on a clean, rigid sensing location.
-
Which cable family is associated with AM3100T2-Z2-00?The 2300 Series documentation lists the 9571 low-cost cable and approved two-wire alternatives.
-
Why does cable length matter for AM3100T2-Z2-00?Long cable runs can attenuate higher-frequency amplitudes, so routing and total length must follow the channel design.
-
How should the -00 suffix on AM3100T2-Z2-00 be handled?Retain it in the complete product identity and confirm its configuration from the supplied unit record.
-
What functional test follows installation of AM3100T2-Z2-00?Check connector integrity, monitor bias or diagnostics and a credible vibration response at the assigned channel.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.