Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 76684-040-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 76684-040-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:76684-040-01
-
Estimated shipping dimensions:7.8x6x4.8cm
-
Weight:0.28 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Transducer family:Legacy 7200 Series
-
Associated probe size:11 mm or 14 mm system
-
Measurement principle:Non-contact eddy current
-
Typical measurement:Shaft vibration or position
-
Installed role:Legacy 7200 probe or extension cable
-
Compatibility rule:Matched 7200 signal-conditioning chain
-
Field handling:Unmodified cable and intact connector
-
Acceptance method:Gap-voltage and dynamic-response test
Information
Overview
Manuals
Common Applications
Product Precautions
The part belongs to an early non-contact eddy-current measurement chain; its exact installed role must be confirmed from the nameplate and retained hardware before replacement.
- Belongs to the early 7200 proximity-transducer family.
- Supports non-contact shaft displacement measurement.
- Must remain matched to the installed 11 mm or 14 mm system.
- Requires nameplate verification before defining its probe-or-cable role.
Use 76684-040-01 only in the specified monitoring chain and verify the complete signal path after controlled replacement.
Important Notice: Capture the installed 76684-040-01 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
Bently Nevada 76684-040-01 Manuals & Downloads
Bently Nevada 76684-040-01 Technical Reference (PDF)Bently Nevada 76684-040-01 Installation & Commissioning Guide (PDF)The first PDF covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance test results.
Legacy shaft vibration
Maintains an early 7200 radial measurement.
Axial position
Supports non-contact shaft-position monitoring.
Spare identification
Matches an installed part by complete marking.
System restoration
Preserves the original 7200 transducer chain.
Before installing Bently Nevada 76684-040-01, confirm the specified system, interfaces and controlled configuration.
1
Confirm the complete 76684-040-01 marking and the specified 7200 series proximity transducer component position.
2
Place the affected machine protection channel in the approved maintenance state.
3
Capture the installed transducer family, associated probe size and measurement principle before removal.
4
De-energize the associated monitor, sensor supply or field circuit as the procedure requires.
5
Label every connector, conductor and shield before separation.
6
Inspect mating contacts, mounting hardware and cable condition before installation.
7
Restore the retained configuration and verify signal polarity and proportional response.
8
Function-test the complete alarm, indication and shutdown path before returning the machine to service.
Technical notes
Capture the installed 76684-040-01 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
FAQ View All FAQ
-
Which transducer family does Bently Nevada 76684-040-01 belong to?Bently Nevada 76684-040-01 belongs to the Legacy 7200 Series family.
-
What associated probe size applies to Bently Nevada 76684-040-01?The associated probe size is 11 mm or 14 mm system.
-
Which value defines the measurement principle of Bently Nevada 76684-040-01?The measurement principle is Non-contact eddy current.
-
What technical function defines the typical measurement of Bently Nevada 76684-040-01?The typical measurement is Shaft vibration or position.
-
What is the installed role of Bently Nevada 76684-040-01?The installed role is Legacy 7200 probe or extension cable.
-
What compatibility rule applies to Bently Nevada 76684-040-01?The compatibility rule is Matched 7200 signal-conditioning chain.
-
What field handling applies to Bently Nevada 76684-040-01?Use Unmodified cable and intact connector.
-
Which test completes the acceptance method for Bently Nevada 76684-040-01?Perform Gap-voltage and dynamic-response test.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.