Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330930-060-00-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330930-060-00-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330930-060-00-05
-
Estimated shipping dimensions:18x18x1.5cm
-
Weight:0.12 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Extension length:6.0 m
-
Cable impedance:75 ohm
-
Insulation:FEP
-
Armor:None
-
Center-conductor resistance:0.220 ohm/m
-
Shield resistance:0.066 ohm/m
-
Capacitance:69.9 pF/m typical
-
Minimum bend radius:25.4 mm
-
Connector material:Gold-plated brass
-
Connector tightening:Finger-tight; 0.56 N·m maximum
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330930-060-00-05 connects a remotely installed NSv probe to its matched signal-conditioning hardware where a longer cable run is needed.
- Uses 75-ohm coaxial construction.
- Insulates the cable with fluorinated ethylene propylene (FEP).
- Provides a typical capacitance of 69.9 pF per metre.
- Uses gold-plated brass connectors.
A 1.0 m NSv probe lead and this 6.0 m extension form a 7.0 m electrical path. The selected Proximitor system length must match that total; physical reach alone is not a sufficient basis for cable selection.
Important Notice: Protect the unarmored run at metal edges and secure both sides of each coaxial joint against cable pull.
Bently Nevada 330930-060-00-05 Manuals & Downloads
Bently Nevada 330930-060-00-05 Manufacturer Technical Reference — Excerpt (PDF)Bently Nevada 330930-060-00-05 Installation & Commissioning Guide (PDF)
The technical reference and field guide cover complementary aspects of this product. Select the document for the task being performed.
Compressor probe routing
Extend an NSv probe connection from a confined compressor measurement point.
Seven-metre transducer chains
Pair with a 1.0 m probe lead and the correct 7.0 m signal conditioner.
Radial vibration channels
Carry the probe signal within a properly matched NSv vibration measurement chain.
Axial-position channels
Connect a compatible NSv probe used for thrust-position measurement.
Installation and service checks for Bently Nevada 330930-060-00-05.
1
Confirm that the probe and extension lengths total the selected system electrical length.
2
Use the NSv cable with the corresponding NSv probe and signal conditioner.
3
Maintain a bend radius of at least 25.4 mm along the route.
4
Provide routing protection appropriate to a cable without stainless-steel armor.
5
Keep mating coaxial contacts clean and dry before connection.
6
Tighten connectors by hand and do not exceed 0.56 N·m.
7
Prevent traction or twisting at the probe-to-extension connection.
8
Check the assembled channel response after routing and connection are complete.
Technical notes
Include the probe lead when calculating electrical length. A cable continuity result alone does not establish a correctly matched proximity-transducer channel.
FAQ View All FAQ
-
Can Bently Nevada 330930-060-00-05 complete a 7.0 m transducer chain?Yes. Its 6.0 m extension length combines with a 1.0 m probe lead to make a 7.0 m path, which must match the selected signal conditioner.
-
What bend limit applies when routing Bently Nevada 330930-060-00-05?The minimum bend radius is 25.4 mm, so a tight fold or sharp turn is unsuitable.
-
Should the coaxial connectors on Bently Nevada 330930-060-00-05 be wrench-tightened?The recommended connection is finger-tight, with a maximum connector torque of 0.56 N·m.
-
How does the construction of Bently Nevada 330930-060-00-05 affect mechanical protection?The cable has FEP insulation but no stainless-steel armor, so its route must protect it from mechanical damage.
-
Which electrical values characterize Bently Nevada 330930-060-00-05?The cable is 75-ohm coaxial, with typical capacitance of 69.9 pF/m, center-conductor resistance of 0.220 ohm/m and shield resistance of 0.066 ohm/m.
-
Does Bently Nevada 330930-060-00-05 itself convert the signal to 4-20 mA?No. It is a passive extension cable; the matched signal-conditioning or transmitter hardware determines the system output.
-
What center-conductor resistance is calculated for the full length of Bently Nevada 330930-060-00-05?Using 0.220 ohm/m over the 6.0 m cable gives 1.32 ohm before connector and test-lead contributions. This calculated cable-only value is not an additional acceptance tolerance.
-
Does the temperature capability of Bently Nevada 330930-060-00-05 set the limit for the entire measurement chain?No. The extension cable has an operating range of -52 to +177 degrees C. The probe, connectors and signal conditioner must each remain within their own applicable limits; the cable rating alone does not qualify the complete installation.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.