Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330910-05-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330910-05-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330910-05-10-02-00
-
Estimated shipping dimensions:109x2x1.5cm
-
Weight:0.14 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe Family:3300 XL NSv
-
Base Probe:330910
-
Mounting Thread:M10 x 1
-
Cable Protection:Flexible AISI 302 stainless-steel armor
-
System Linear Range:1.5 mm (60 mils)
-
Recommended Gap:1.0 mm (40 mils)
-
Nominal Scale Factor:7.87 V/mm (200 mV/mil)
-
Reference Target:Bently Nevada AISI 4140 steel target
-
Proximitor Power:-17.5 to -26 Vdc without barriers
-
Maximum Proximitor Current:12 mA
-
Field Wiring:Three-conductor shielded triad recommended
-
Maximum Field-Wiring Length:305 m (1,000 ft) between Proximitor and monitor
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330910-05-10-02-00 combines a metric M10 x 1 probe body with armored cable construction for compact NSv sensing points where the lead requires added mechanical protection.
- Uses the 330910 M10 x 1 armored NSv probe construction.
- Supports a matched 3300 XL NSv probe, extension cable and Proximitor chain.
- Targets non-contacting relative vibration and position measurements.
- Keeps every supplied suffix intact while leaving unsupported option meanings unresolved.
The probe forms the machine-end element of a calibrated proximity-transducer chain. The installed reading depends on the exact probe marking, companion extension cable, Proximitor length selection, target material and accepted static gap.
Important Notice: Retain the complete 330910-05-10-02-00 identifier. The current manufacturer ordering table shows five option positions after 330910, so no omitted position or length value is inferred from this four-position supplied marking.
Bently Nevada 330910-05-10-02-00 Manuals & Downloads
Bently Nevada 330910-05-10-02-00 Official Technical Reference (PDF)Bently Nevada 330910-05-10-02-00 Installation & Commissioning Guide (PDF)
The Technical Reference organizes the exact ordering identity, applicable characteristics and system boundary for this armored proximity probe. The Installation & Commissioning Guide covers identification, pre-installation checks, connections, functional verification and the acceptance record.
Compact shaft locations
Measure relative shaft motion where the narrow-side-view probe geometry suits the available mounting space.
Journal-bearing vibration
Feed a matched NSv proximity channel used for relative radial-vibration monitoring.
Axial position checks
Track target movement when the mounting geometry and calibrated range are suitable.
Armored lead routing
Use the stainless-steel armor where the probe cable needs mechanical protection along the installed route.
Apply these checks to the exact Bently Nevada 330910-05-10-02-00 item before returning its monitoring path to service.
1
Read and record the full 330910-05-10-02-00 marking before removal.
2
Do not infer a missing ordering position; compare the nameplate with the installed-system record.
3
Verify M10 x 1 thread engagement and probe-tip clearance before tightening.
4
Match the probe and extension cable to the selected NSv Proximitor electrical length.
5
Keep ClickLoc connections clean, insulated from ground and assembled to the specified method.
6
Support the armored lead without kinking or loading the probe body.
7
Set and document the static gap against the correct target material.
8
Verify the recovered gap voltage and dynamic signal before enabling protection logic.
Technical notes
Retain the complete 330910-05-10-02-00 identifier. The current manufacturer ordering table shows five option positions after 330910, so no omitted position or length value is inferred from this four-position supplied marking.
FAQ View All FAQ
-
What probe family does Bently Nevada 330910-05-10-02-00 belong to?It belongs to the 3300 XL NSv proximity-transducer family.
-
Which thread is used by Bently Nevada 330910-05-10-02-00?The 330910 base identifies an M10 x 1 threaded probe.
-
Does Bently Nevada 330910-05-10-02-00 have cable armor?Yes. The 330910 base is the armored M10 x 1 NSv probe construction.
-
What linear range applies to the matched Bently Nevada 330910-05-10-02-00 system?The matched NSv system is specified for a 1.5 mm (60 mil) linear range under the stated reference conditions.
-
What gap is recommended for Bently Nevada 330910-05-10-02-00?The NSv system reference gap is 1.0 mm (40 mils) the installed point still requires a recorded acceptance check.
-
Can a nearby probe suffix replace Bently Nevada 330910-05-10-02-00?No. Compare the complete marking, mechanical lengths, cable execution, connector and approval selection.
-
Why are some option meanings omitted for Bently Nevada 330910-05-10-02-00?The supplied marking has fewer option groups than the current manufacturer table, so unsupported positions are intentionally not decoded.
-
What confirms commissioning of Bently Nevada 330910-05-10-02-00?Record the exact component chain, static gap, gap voltage, dynamic response and the accepted machine-channel result.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.