Which Bently Nevada components must be matched with 330910-00-07-05-02-CN?

Use 330910-00-07-05-02-CN only with the documented 3300 XL NSv Proximity Transducer System arrangement, including 3300 XL NSv Proximitor Sensor, Matched NSv extension cable when required, Conductive machine shaft.

How should the complete 330910-00-07-05-02-CN order code be checked before installation?

Compare every suffix with the nameplate and the controlling 147385 Rev. R ordering table; the documented probe model is 330910.

Can 330910-00-07-05-02-CN directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330910-00-07-05-02-CN code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Bently Nevada 330910-00-07-05-02-CN 3300 XL NSv M10 x 1 armored proximity probe

Name: 330910-00-07-05-02-CN
Brand: Bently Nevada
SKU: 330910-00-07-05-02-CN

330910-00-07-05-02-CN

3300 XL NSv M10 x 1 armored proximity probe

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330910-00-07-05-02-CN

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330910-00-07-05-02-CN

Estimated shipping dimensions:

68.3x1.7x2cm

Weight:

0.08 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Probe model:

330910

Probe thread:

M10 x 1

Armor:

Yes

Unthreaded length:

0 mm

Overall case length:

70 mm

Total probe length:

0.5 m (20 in)

Connector:

Miniature coaxial ClickLoc

Probe cable:

Standard FEP-insulated coaxial

Approval suffix:

Country-specific CN suffix

Probe DC resistance:

4.0 +/-0.5 Ohm

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Supply sensitivity:

<2 mV/V

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

1.5 mm (60 mils)

Linear-range limits:

0.25 to 1.75 mm (10 to 70 mils)

Recommended gap:

1.0 mm (40 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB typical

Minimum flat target:

8.9 mm diameter

Recommended flat target:

13 mm diameter minimum

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330910-00-07-05-02-CN is 3300 xl nsv m10 x 1 armored proximity probe. It senses shaft-to-probe displacement and supplies the non-contact eddy-current input for a matched 3300 XL NSv monitoring loop.

Uses an M10 x 1 armored probe body
Combines a 70 mm case with a 0.5 m lead
Terminates in a miniature ClickLoc connection
Operates in a matched 3300 XL NSv transducer system

330910-00-07-05-02-CN operates with 3300 XL NSv Proximitor Sensor, Matched NSv extension cable when required, Conductive machine shaft, Compatible Bently Nevada monitor channel.

Engineered applications include Small-shaft radial vibration, Axial position measurement, Tachometer and phase reference, NSv probe-loop renewal.

Important Notice: Verify the full 330910-00-07-05-02-CN marking, M10 x 1 mounting, 70 mm case, 0.5 m lead and matched NSv system length before gap adjustment.

Apter Power 330910-00-07-05-02-CN Manuals and Guides

Apter Power 330910-00-07-05-02-CN Product Technical Reference PDF Bently Nevada 330910-00-07-05-02-CN Official System Manual PDF

The first document is a model-specific technical reference. The second is the directly related Bently Nevada system document used for installation and engineering verification.

Small-shaft radial vibration

Measures relative journal motion on compact rotating machinery.

Axial position measurement

Tracks thrust movement without mechanical contact.

Tachometer and phase reference

Provides shaft event timing when engineered for speed or phase service.

NSv probe-loop renewal

Restores a documented 0.5 m NSv probe configuration.

Read the applicable Bently Nevada installation instructions before work. Verify 330910-00-07-05-02-CN and the installed 3300 XL NSv Proximity Transducer System configuration.

Verify the complete 330910-00-07-05-02-CN marking, M10 x 1 armored construction and assigned measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing the probe.

Protect the probe tip and M10 x 1 armored interface from impact, burrs, contamination and unintended side-view metal.

Route and support the 0.5 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep every ClickLoc interface clean, dry and fully engaged; preserve connector-protector hardware where supplied.

Confirm the matched 3300 XL NSv Proximitor Sensor, total system length and target material before setting the static gap.

Maintain the documented probe-tip separation where adjacent channels could create cross-talk.

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.

FAQS

What exact system function does 330910-00-07-05-02-CN provide?

330910-00-07-05-02-CN is 3300 xl nsv m10 x 1 armored proximity probe. It senses shaft-to-probe displacement and supplies the non-contact eddy-current input for a matched 3300 XL NSv monitoring loop.
Which Bently Nevada components must be matched with 330910-00-07-05-02-CN?

Use 330910-00-07-05-02-CN only with the documented 3300 XL NSv Proximity Transducer System arrangement, including 3300 XL NSv Proximitor Sensor, Matched NSv extension cable when required, Conductive machine shaft.
How should the complete 330910-00-07-05-02-CN order code be checked before installation?

Compare every suffix with the nameplate and the controlling 147385 Rev. R ordering table; the documented probe model is 330910.
What installation detail is critical for 330910-00-07-05-02-CN?

Protect the probe tip and M10 x 1 armored interface from impact, burrs, contamination and unintended side-view metal.
What wiring or connector checks are required for 330910-00-07-05-02-CN?

Route and support the 0.5 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.
How should 330910-00-07-05-02-CN be configured with its monitoring channel?

Confirm the matched 3300 XL NSv Proximitor Sensor, total system length and target material before setting the static gap.
What commissioning test should be performed after installing 330910-00-07-05-02-CN?

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.
Can 330910-00-07-05-02-CN directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330910-00-07-05-02-CN code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330910-00-07-05-02-CN

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330910-00-07-05-02-CN

Technical specifications for 330910-00-07-05-02-CN

Information

Information