With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330908-00-60-10-01-00 is a 3300 NSv series non-contact eddy current proximity probe manufactured by Bently in the USA. It is primarily used in industrial vibration monitoring systems for large rotating machinery, specifically designed to measure radial vibration, axial displacement, and rotational speed/key phase of shafts.
Axial (thrust) position measurements
Tachometer and zero speed measurements
Radial vibration and radial position measurements
The 3300 XL NSv Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with tight installation requirements. The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).
The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable, and monitoring system with 3300 XL NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, extension cable, and Proximitor Sensor with NSv components.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330908-00-60-10-01-00 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
330908-00-60-10-01-00 is threaded from the inside of compact hydrocarbon pump casings where standard probes cannot fit, tracking shaft centerline runout to prevent volatile leakage.
Thermal Power
Installed via specialized sleeves on multi-stage boiler feed water pumps, the 330908-00-60-10-01-00 delivers dynamic vibration feedback under high-temperature conditions to avert forced shutdowns.
Steel & Metallurgical
Large air blowers utilize the 330908-00-60-10-01-00 within their internal oil-lubricated bearings to capture early indications of rotor unbalance or misalignment caused by industrial particulate buildup.
Hydroelectric Power
The 330908-00-60-10-01-00 is deployed inside compact water-turbine setups to monitor structural runout and shaft thermal expansion induced by varying hydraulic thrust loads.
Pulp & Paper
Capable of enduring continuous ambient temperatures up to +177°C (+350°F), the 330908-00-60-10-01-00 measures the dynamic runtime profiles of compact heated cylinder rollers without signal drift.
When installing and operating the Bently Nevada 330908-00-60-10-01-00 reverse-mount proximity probe, strict adherence to its unique mechanical and electrical specifications is critical. Due to its specialized reverse-mount configuration, never over-torque the locknuts during mounting inside the sleeve, as excessive stress can easily crush the internal electronics. This model comes with an integrated 6.0-meter cable and must be connected directly to the Proximitor sensor—adding an external extension cable is strictly prohibited. Furthermore, because this cable features no protective armor, technicians must route it with a smooth bend radius, keeping it free from sharp edges, kinks, or excessive tension.
The Bently Nevada 330908-00-60-10-01-00 is a 3300 NSv series non-contact eddy current proximity probe.
How do you install and use the 330908-00-60-10-01-00 reverse mount probe?
You insert the 330908-00-60-10-01-00 probe into a compatible reverse-mount housing or sleeve, set the target mechanical gap using a voltmeter, lock it securely in place, and route its integrated 6-meter cable directly to a 3300 NSv Proximitor sensor.
Which monitoring systems are compatible with the 330908-00-60-10-01-00 sensor?
It is fully compatible with the Bently Nevada 3500 Machinery Protection System (via the 3500/42M monitor card) and the Bently Nevada 991 Axial Displacement Transmitter series.
What type of target material is the 330908-00-60-10-01-00 calibrated for?
It is standard factory-calibrated for AISI 4140 electric furnace steel targets. Utilizing other target metals will require system recalibration due to variations in magnetic permeability.
Is the 330908-00-60-10-01-00 approved for explosive or hazardous locations?
Yes. The -01 agency approval code confirms that the 330908-00-60-10-01-00 holds multiple international certifications (including ATEX, IECEx, and CSA) for intrinsically safe installations in Zone 0 or Class I, Division 1 areas.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
