Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330903-00-07-10-01-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330903-00-07-10-01-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330903-00-07-10-01-00
-
Estimated shipping dimensions:1.3x1.1x65cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe thread:M8 x 1
-
Armor:None
-
Unthreaded length:0 mm
-
Overall case length:70 mm
-
Total length:1.0 m
-
Connector option:Standard ClickLoc with protector
-
Agency approval:None
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330903-00-07-10-01-00 is an unarmored M8 x 1 NSv probe with 0 mm unthreaded length, 70 mm case, 1.0 m total length and a standard ClickLoc connector with protector. The final 00 option specifies no agency approval.
- M8 x 1 unarmored NSv probe
- 70 mm case with 0 mm unthreaded length
- 1.0 m integral probe lead
- ClickLoc connector protector included
Install 330903-00-07-10-01-00 with a matched NSv extension cable and Proximitor Sensor so the complete electrical length is 5 m or 7 m. Set the gap on the installed target only after verifying case clearance, cable routing and channel configuration.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330903-00-07-10-01-00 Manuals and Guides
Apter Power 330903-00-07-10-01-00 Product Technical ReferenceBently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Tight-access radial vibration
Fits compact counterbore locations in supported rotating machinery.
Axial position measurement
Measures controlled shaft position with a matched NSv loop.
Keyphasor reference
Supports phase-reference or speed functions under manufacturer guidance.
Compressor monitoring
Serves small-target measurements on supported centrifugal or process-gas compressors.
Read the applicable Bently Nevada documentation before work. Verify 330903-00-07-10-01-00 from the physical marking and the installed system record.
1
Verify the full 330903-00-07-10-01-00 marking before installation.
2
Use an M8 x 1 tapped hole with no more than 12 mm probe-thread engagement.
3
Apply the published M8 probe torque and do not exceed the maximum case torque.
4
Keep the 1.0 m cable above the published 25.4 mm minimum bend radius.
5
Protect the PPS tip from impact and keep the connector clean and dry.
6
Confirm the extension cable and Proximitor Sensor produce a 5 m or 7 m NSv system.
7
Verify target size, shaft diameter and probe-to-probe separation before gapping.
8
Prove static gap, dynamic response and the configured monitor channel before release.
Technical notes
Install 330903-00-07-10-01-00 with a matched NSv extension cable and Proximitor Sensor so the complete electrical length is 5 m or 7 m. Set the gap on the installed target only after verifying case clearance, cable routing and channel configuration.
FAQ View All FAQ
-
What tapped-hole engagement limit applies to 330903-00-07-10-01-00?For the M8 x 1 case, the published maximum thread engagement is 12 mm.
-
Does 330903-00-07-10-01-00 include a connector protector?Yes. Connector option 01 is the standard ClickLoc coaxial connector with protector.
-
How must the 1.0 m lead on 330903-00-07-10-01-00 be completed electrically?Use the matching NSv extension cable and sensor so the installed system totals 5 m or 7 m.
-
Which tightening value is recommended for 330903-00-07-10-01-00?The M8 x 1 recommended probe torque is 5.1 N m; never exceed the published maximum.
-
What nominal gap should be established for 330903-00-07-10-01-00?The published recommended gap is 1.0 mm, subject to target and installation verification.
-
What target face is needed when accepting 330903-00-07-10-01-00?The minimum flat target is 8.9 mm diameter and 13 mm is recommended.
-
How closely may another NSv probe be mounted beside 330903-00-07-10-01-00?Maintain at least 25 mm axial separation or 23 mm radial separation to control cross-talk.
-
What cold-temperature caution applies to 330903-00-07-10-01-00?The probe is rated to -52 C, but prolonged exposure below -34 C can prematurely fail the pressure seal.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.