Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330901-04-24-10-02-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 330901-04-24-10-02-05 and the visible revision or assembly identity in your enquiry. Keep the full reference on the quotation. -
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 330901-04-24-10-02-05 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330901-04-24-10-02-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330901-04-24-10-02-05
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL NSv
-
Case thread:1/4-28 UNF
-
Lead armor:without armor
-
Unthreaded length:0.4 in
-
Overall case length:2.4 in
-
Probe lead length:1.0 m
-
Connector:ClickLoc connector
-
Approval selection:multiple approvals selected
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Bently Nevada 330901-04-24-10-02-05. This 3300 XL NSv probe senses the gap to a conductive target as one part of the complete proximity transducer chain.
Nominal 1 m probe DC resistance: 4.2 ± 0.5 Ω
Recommended flat target diameter: 13 mm minimum
Matched-system reference gap: 1.0 mm (40 mil)
Matched-system response: 0 to 10 kHz, typical
Recommended flat target diameter: 13 mm minimum
Matched-system reference gap: 1.0 mm (40 mil)
Matched-system response: 0 to 10 kHz, typical
Part prefix 330901 selects a 1/4-28 UNF case without lead armor. The selected unthreaded section is 0.4 in, within an overall 2.4 in case. The NSv probe uses TipLoc tip molding and CableLoc cable attachment rated at 220 N (50 lb) pull strength. Gold-plated ClickLoc contacts lock together; the connector protector helps exclude liquid from the probe-to-cable joint.
Option 10 provides a 1.0 m lead. Code 02 supplies a clickloc connector; keep this connection clean and match it to the extension cable. Only a matched NSv probe, extension cable and Proximitor sensor establish measurement performance. For the complete calibrated system, the manufacturer specifies 7.87 V/mm (200 mV/mil) average scale factor and a 1.5 mm (60 mil) linear range, approximately 0.25 to 1.75 mm from a suitable target.
The final code 05 denotes multiple approvals selected. Gap, scale factor and linear range describe the matched 3300 XL NSv system, rather than this probe alone. The NSv system addresses restricted counterbore and side-view installations, including small shafts and flat axial targets. Supported system applications include radial vibration or position, thrust position and speed or phase reference; the installed target and monitor channel determine which measurement is used.
Option 10 provides a 1.0 m lead. Code 02 supplies a clickloc connector; keep this connection clean and match it to the extension cable. Only a matched NSv probe, extension cable and Proximitor sensor establish measurement performance. For the complete calibrated system, the manufacturer specifies 7.87 V/mm (200 mV/mil) average scale factor and a 1.5 mm (60 mil) linear range, approximately 0.25 to 1.75 mm from a suitable target.
The final code 05 denotes multiple approvals selected. Gap, scale factor and linear range describe the matched 3300 XL NSv system, rather than this probe alone. The NSv system addresses restricted counterbore and side-view installations, including small shafts and flat axial targets. Supported system applications include radial vibration or position, thrust position and speed or phase reference; the installed target and monitor channel determine which measurement is used.
Installed-system reference: 3300 XL NSv proximity transducer system. Match the probe lead and connector to the complete NSv transducer chain.
Technical downloads for Bently Nevada 330901-04-24-10-02-05: selected original manufacturer pages and a model-specific Apter Power installation guide.
-
Bently Nevada 330901-04-24-10-02-05 technical reference
Original manufacturer excerpt - PDF, 4 pages. The 330901 option matrix identifies probe construction and lead selection. System performance requires a matched extension cable and Proximitor sensor. -
Bently Nevada 330901-04-24-10-02-05 installation guide
Prepared by Apter Power - PDF, 5 pages. Installation checks, fitting and lead routing, commissioning and verification.
The technical reference preserves selected original manufacturer pages. The installation guide is prepared by Apter Power for this exact model; apply site procedures and the original equipment documentation during work.
Measurement role: 330901-04-24-10-02-05 is a 3300 XL NSv proximity probe installed opposite a suitable machine target. In its matched probe, extension-cable and Proximitor chain, it converts changes in probe-to-target gap into signals used for relative shaft vibration or position measurements.
System compatibility: The 1/4-28 UNF case, 1.0 m integral lead and ClickLoc connector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
System compatibility: The 1/4-28 UNF case, 1.0 m integral lead and ClickLoc connector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
-
Radial shaft vibration
At a bearing measurement plane, the probe can observe relative shaft motion against a conductive target. The monitoring channel interprets that dynamic gap signal within the matched transducer-system range. -
Axial shaft position
A suitable thrust-position arrangement can use the same noncontact sensing principle to follow axial movement. Target travel and probe placement must remain within the documented system range. -
Phase or speed reference
A once-per-turn target can provide a reference signal when the installed monitor and target design support that function. The probe order code alone does not create a Keyphasor channel. -
Installed-system integration
The 1/4-28 UNF mounting and 1.0 m lead identify the physical probe execution. Pair it with the correct extension cable and Proximitor rather than mixing 3300 XL 8 mm and NSv system components.
Installation and commissioning checks for Bently Nevada 330901-04-24-10-02-05. Preserve the exact probe execution and matched transducer-chain length during replacement.
Isolate the measurement
Make the machine and monitoring channel safe before moving the probe. Record the previous gap setting and connector route.
Mounting thread
Confirm the 1/4-28 UNF opening and case length against the installed bracket. Do not force a dissimilar thread or alter the target clearance.
Target geometry
Inspect the conductive target area, maximum shaft travel and adjacent metal before setting the gap. Avoid positions where the tip may contact the target.
Lead and connector
Route the 1.0 m lead without sharp bends, heat exposure or strain at the ClickLoc connector. Keep mating surfaces clean and protect the connection from contamination.
Matched system length
Count the integral lead and extension cable as one transducer-system length. Verify the installed Proximitor family and approved monitor scaling before interpreting voltage.
Commissioning response
Set the static gap under the approved procedure, then check DC gap voltage and dynamic response. Compare the result with the site acceptance limits for the complete channel.
Alternative Names
3309010424100205
Bently Nevada 330901-04-24-10-02-05
Technical notes
Probe configuration: 330901 selects a 1/4-28 UNF unarmored case with 2.4 in overall length and 1.0 m lead.
System boundary: Measurement performance depends on the matched probe, extension cable, Proximitor sensor and target material.
Technical reference: Bently Nevada 3300 XL NSv Proximity Transducer System, 147385 Rev. R.
FAQ View All FAQ
-
What sensing family does 330901-04-24-10-02-05 belong to?It is a 3300 XL NSv probe. It works with a matched extension cable and Proximitor sensor.
-
Which case thread is selected for 330901-04-24-10-02-05?The 330901 part prefix selects a 1/4-28 UNF case thread.
-
Is the lead of 330901-04-24-10-02-05 armored?No. The 330901 probe prefix denotes a version without lead armor.
-
How long is the unthreaded portion of 330901-04-24-10-02-05?Option 04 selects 0.4 in unthreaded length.
-
What is the overall probe case length of 330901-04-24-10-02-05?Option 24 selects 2.4 in overall case length.
-
How long is the integral lead on 330901-04-24-10-02-05?Option 10 selects a 1.0 m probe lead.
-
What connection is supplied with 330901-04-24-10-02-05?Option 02 specifies a clickloc connector; protect the connection during routing and installation.
-
Does 330901-04-24-10-02-05 alone establish the system measurement range?No. The matched 3300 XL NSv probe, extension cable, Proximitor sensor and target calibration establish system performance.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.