With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330730-080-13-05 is an 8mm high-pressure proximity probe from the Bently Nevada 3300 XL series. Specifically designed for pressurized environments, this probe is a standard component for pressure vessels or converter housings in industrial rotating machinery monitoring.
3300 XL 11 mm probe
3300 XL 11 mm extension cable
3300 XL 11 mm Proximitor Sensor
The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines. The large 11 mm tip enables this transducer system to have a longer linear range compared to our standard 3300 XL 8 mm Transducer System.The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200-series 11 mm and 14 mm Transducer Systems. When upgrading from the 7200-series system to the 3300 XL 11 mm system, every component must be replaced with 3300 XL 11 mm components. In addition, the monitoring system must be updated. If using a 3500 Monitoring System, an updated version of the configuration software that lists the 3300 XL 11 mm Transducer System as a compatible option is required.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330730-080-13-05 3300 XL 11 mm Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petroleum Refining
Monitoring shaft vibration on hydrocracking compressors while sealing internal high-pressure hydrogen gas.
Natural Gas Pipelines
Monitoring axial thrust position on gas turbine-driven compressors at booster stations.
Petrochemical Industry
Measuring non-contact displacement within the high-pressure chambers of ethylene feed pumps.
Air Separation
Monitoring bearing clearance changes at the high-pressure end of turbo-expanders.
Offshore Engineering
Monitoring rotor unbalance vibration on high-pressure injection pumps on offshore platforms.
Chemical Fertilizer
Monitoring journal vibration by penetrating the pressurized casing of ammonia compressors.
When using the 330730-080-13-05 high-pressure probe, the primary task is to ensure the high-pressure seals (such as O-rings) are intact and properly seated to withstand static pressures up to 500 psi and prevent leakage. Given its 8.0-inch extra-long unthreaded length, strict alignment with the mounting hole is essential to avoid probe body damage from lateral stress or friction. Additionally, verify that the total system length matches the 3300 XL Proximitor calibration, precisely adjust the DC gap voltage to the linear midpoint after installation, and keep connectors dry and clean to prevent signal drift.
It is a 3300 XL 8mm High-Pressure Proximity Probe manufactured by Bently Nevada, specifically designed for applications that penetrate pressurized machine casings.
What is the primary use of 330730-080-13-05?
It is primarily used to measure shaft vibration or axial position of rotating machinery (like compressors or pumps) in high-pressure environments.
What is the measurement principle of 330730-080-13-05?
It utilizes the eddy current principle. The magnetic field from the probe induces eddy currents on the metal shaft surface, converting energy loss into distance changes.
How to properly install 330730-080-13-05?
It must be threaded into a high-pressure seal housing or specialized mounting hole, and the gap voltage must be monitored using a multimeter to set the initial position.
Is 330730-080-13-05 heat resistant?
Yes, its operating temperature range is typically -35°C to +177°C.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
