Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330130-00-05-05-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330130-00-05-05-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330130-00-05-05-02-00
-
Estimated shipping dimensions:20x18x2cm
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Cable family:3300 XL standard extension cable
-
Signal path:Probe lead to Proximitor sensor
-
Electrical function:Calibrated extension of the proximity transducer chain
-
Connector family:ClickLoc coaxial
-
System rule:Probe plus extension cable equals Proximitor electrical length
-
Cable construction:Low-noise calibrated coaxial extension
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330130-00-05-05-02-00 forms the coaxial link between a compatible probe lead and the matched 3300 XL Proximitor sensor.
- Carries the low-level proximity signal to the conditioner.
- Maintains the calibrated electrical length of the transducer chain.
- Uses the 3300 XL standard extension-cable family interface.
- Requires clean, fully engaged coaxial connectors at both ends.
The cable is part of the calibrated transducer path rather than ordinary coaxial wiring. Its family and electrical length must match the installed probe and Proximitor sensor.
Important Notice: Compare the complete 330130-00-05-05-02-00 marking with the installed cable before disconnection. Record the restored gap voltage and proportional response before service release.
Bently Nevada 330130-00-05-05-02-00 Manuals & Downloads
Bently Nevada 330130-00-05-05-02-00 Official Technical Reference Excerpt (PDF)Bently Nevada 330130-00-05-05-02-00 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Electrical-length completion
Provides the documented installed length extension section required by the matched 3300 XL transducer chain.
Probe-to-conditioner connection
Carries the calibrated coaxial signal from the probe lead to the Proximitor sensor.
Position measurement loop
Maintains the defined signal path for static shaft-position measurements.
Maintenance replacement
Restores a damaged cable section while preserving the selected system length.
Before installing Bently Nevada 330130-00-05-05-02-00, confirm the documented system, interfaces and controlled configuration.
1
Compare the complete 330130-00-05-05-02-00 marking with the installed cable before disconnection.
2
Confirm the required exact marked construction construction and connector arrangement.
3
Do not shorten, splice or field-repair the calibrated coaxial cable.
4
Clean and inspect both ClickLoc interfaces before mating the connectors.
5
Provide strain relief and protect the cable from abrasion, heat and moving hardware.
6
Use the cable only inside a matched 3300 XL probe and Proximitor system.
7
Verify continuity and positive connector engagement before energizing the channel.
8
Record the restored gap voltage and proportional response before service release.
Technical notes
Compare the complete 330130-00-05-05-02-00 marking with the installed cable before disconnection. Record the restored gap voltage and proportional response before service release.
FAQ View All FAQ
-
What system role is performed by 330130-00-05-05-02-00?It links the probe lead to the matched 3300 XL Proximitor sensor.
-
Why cannot be replaced by ordinary coaxial cable 330130-00-05-05-02-00?Its calibrated electrical characteristics form part of the 3300 XL transducer system.
-
Why is electrical length critical for 330130-00-05-05-02-00?The probe lead plus extension cable must equal the Proximitor system length.
-
May be repaired by splicing 330130-00-05-05-02-00?No. Splicing changes the calibrated cable characteristics.
-
Which connector surfaces should be inspected on 330130-00-05-05-02-00?Check the ClickLoc contacts for contamination, corrosion and incomplete engagement.
-
How should routing protect 330130-00-05-05-02-00?Provide strain relief and avoid heat, abrasion, crushing and sharp bends.
-
What must be matched before energizing a chain containing 330130-00-05-05-02-00?Confirm probe family, extension-cable identity, Proximitor system length and monitor scale.
-
Which measurements verify a restored chain using 330130-00-05-05-02-00?Record bias voltage and proportional target response at the monitor input.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.