With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330104-04-09-10-01-05 is an eddy current proximity probe belonging to the 3300 XL 8mm series. This product includes an M10×1 reverse mount probe body configured with a 40 mm unthreaded length and a 90 mm overall case length, equipped with a 1.0-meter stainless steel armored cable and a standard ClickLoc miniature coaxial connector with a connector protector. It carries multi-agency hazardous area approvals and forms a transducer system with the same series extension cable and Proximitor sensor to measure axial displacement, radial vibration, and speed.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330104-04-09-10-01-05 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power Generation
Monitor shaft vibration and axial displacement of steam turbines and generators.
Hydroelectric Power Generation
Monitor radial runout and thrust bearing clearance of hydro-turbine generators.
Nuclear Power Industry
Monitor shafting status of conventional island turbine-generators and main coolant pumps.
Oil & Gas Extraction
Monitor rotor status of large water injection pumps and production compressors on offshore platforms.
Petrochemical & Refining
Monitor bearing clearance and displacement of catalytic cracking units and hydro-feeding pumps.
Iron & Steel Metallurgy Industry
Monitor axial thrust of blast furnace blowers and Top Gas Recovery Turbine (TRT) units.
During the use of the 330104-04-09-10-01-05, ensure the probe tip is perpendicular to the observed conductive surface with the correct linear gap, and avoid strong electromagnetic interference or mechanical scratches to the tip. Installation must strictly follow hazardous area wiring and sealing regulations, avoid excessive bending or twisting of the armored cable, and ensure the ClickLoc connector is securely tightened with its protector in place to prevent oil or chemical ingress from affecting signal transmission.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
What are the physical components included in 330104-04-09-10-01-05?
It includes an 8mm diameter Polyphenylene Sulfide (PPS) probe tip, a stainless steel threaded case, a 1.0-meter stainless steel armored coaxial cable, and a miniature coaxial ClickLoc connector with a connector protector.
Which series does 330104-04-09-10-01-05 belong to?
This product belongs to the 3300 XL 8 mm Proximity Transducer System.
What is the physical measurement principle of 330104-04-09-10-01-05?
The probe tip generates an alternating magnetic field via an internal coil, inducing eddy currents on the metallic target surface to measure distance variation.
What are the technical range and recommended gap of 330104-04-09-10-01-05?
Its linear range is 2.0 mm (80 mils), and the recommended operating gap range is 0.25 to 2.3 mm.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
