With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330103-00-06-05-01-CN is a 3300 XL series 8mm non-contacting proximity transducer. Designed with M10 x 1 metric threads, it is used to monitor shaft vibration, displacement, and speed of rotating machinery. This specific model features a 60mm fully threaded case and a 0.5-meter integral cable connected via ClickLoc connectors.
3300 XL 8 mm probe
3300 XL extension cable
3300 XL Proximitor Sensor
The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330103-00-06-05-01-CN 3300 XL 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Monitoring radial vibration of high-speed rotors to prevent bearing failure caused by surge.
Power Generation
Measuring axial thrust (position) of the main shaft to prevent rotor-to-stator contact.
Steel & Metallurgy
Monitoring unbalanced vibration of high-speed blower rotors to avoid unplanned downtime.
Air Separation
Monitoring the stability of high-speed rotating components via gap voltage.
Paper & Pulp
Precisely measuring micron-level displacement of bearings in harsh, high-temperature, and humid environments.
Nuclear Power
Providing high-reliability non-contact vibration signals for critical rotating equipment outside the nuclear island.
When using the 330103-00-06-05-01-CN probe, the priority is to ensure the total electrical length matches the paired Proximitor and extension cable (typically a 5m or 9m system); never cut the cable as it will cause measurement failure. During installation, use the M10 metric threads to precisely calibrate the gap voltage (typically -10Vdc) and ensure sufficient side clearance around the probe tip to eliminate electromagnetic interference. Due to its -CN certification, strict adherence to Chinese explosion-proof wiring standards is mandatory in hazardous areas. Additionally, ensure the ClickLoc connectors are clean, dry, and securely locked to prevent signal spikes or false alarms caused by oil ingress or poor contact.
It is a 3300 XL series 8mm eddy current proximity probe with M10×1 metric threads, manufactured by Bently Nevada.
What is the linear range of 330103-00-06-05-01-CN?
Its standard linear range is 80 mils (2.0 mm).
What equipment should 330103-00-06-05-01-CN be used with?
It must be used with a 3300 XL Proximitor and an appropriately lengthed extension cable.
How to install the 330103-00-06-05-01-CN?
Thread it into a bracket and secure its position by adjusting the gap voltage (typically -10 Vdc) between the probe and the shaft.
Is 330103-00-06-05-01-CN compatible with the 3500 system?
Yes, it is one of the most common front-end sensors used in the 3500 series machinery protection system.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
