• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      330102-00-30-10-01-05

      Proximity Probe
      Ships by Saturday, November 7
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 330102-00-30-10-01-05 is an armored 3300 XL 8 mm proximity probe for noncontact shaft measurement, with a 3/8-24 UNF case and 1.0 m lead.
      • Manufacturer part number
        330102-00-30-10-01-05
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        1.6cm × 1.3cm × 113cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 330102-00-30-10-01-05
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete 330102-00-30-10-01-05 marking, quantity and probe, cable and connector photos so the required configuration can be checked.

      • 1

        Confirm the offer

        Review the quoted condition, probe configuration, separately included components and documents, and the expected dispatch date before approving the order.

      • 2

        Arrange dispatch

        Confirm delivery details and receive the tracking reference when the shipment is arranged.

      • Match the complete marking

        Include 330102-00-30-10-01-05 and any serial or approval marking visible on the offered probe. Preserve the entire option sequence when comparing with the installed item.

      • Check the offered item before ordering

        Request current tip, case-thread, armored cable and connector photos. Compare the offered 330102-00-30-10-01-05 mounting interface and cable configuration with the installed measuring chain; itemize separately supplied components.

      Technical specifications for 330102-00-30-10-01-05

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        330102-00-30-10-01-05
      • Weight:
        0.15 kg
      • Tariff Code:
        8537101190
      • Product series:
        3300 XL 8 mm
      • Product type:
        Armored proximity probe
      • Sensing principle:
        Noncontact eddy current
      • Probe tip diameter:
        8 mm
      • Case thread:
        3/8-24 UNF
      • Unthreaded length:
        0.0 in
      • Case length:
        3.0 in
      • Total probe length:
        1.0 m
      • Connector option 01:
        Miniature coaxial ClickLoc with connector protector
      • Cable option:
        Standard cable; not FluidLoc
      • Approval option 05:
        CSA / ATEX / IECEx option; verify supplied marking
      • Nominal probe DC resistance:
        7.59 ±0.50 ohms
      • Tip material:
        Polyphenylene sulfide (PPS)
      • Case material:
        AISI 303 or 304 stainless steel
      • Cable impedance:
        75 ohms
      • Matched-system linear range:
        2.0 mm
      • Matched-system sensitivity:
        7.87 V/mm; ±5% for 1/5 m systems, ±6.5% for 9 m
      • Recommended radial gap:
        1.27 mm (approximately -9 V)
      • Minimum cable bend radius:
        25.4 mm
      • Connector tightening:
        Finger tight; 0.565 N m maximum
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • An existing imperial-thread mounting can be retained while the electrical chain is checked independently. Bently Nevada 330102-00-30-10-01-05 provides the armored probe end of an 8 mm channel, with a short integral lead that allows the required system length to be completed outside the mounting location.
      Probe family: 3300 XL 8 mm
      Mounting thread: 3/8-24 UNF
      Cable construction: Armored, standard cable
      Total probe length: 1.0 m
      Match the 1 m probe to a 1 m Proximitor system, or use a 4 m extension for a 5 m system or an 8 m extension for a 9 m system.

      The probe responds to the distance between its tip and a conductive target. Evaluate mounting stiffness, target material and surface condition with the monitor configuration. Full-system performance must not be treated as the standalone probe output.
      Controller platform reference: 3300 XL 8 mm proximity transducer system. Match the complete chain and approved installation requirements.
      Technical downloads for Bently Nevada 330102-00-30-10-01-05: a manufacturer technical excerpt and an Apter Power installation and commissioning guide.
      The technical reference preserves selected manufacturer pages. The installation guide is compiled by Apter Power for preparation and review; apply the original operating procedures and site controls during work.
      Product classification: Bently Nevada 330102-00-30-10-01-05 is an armored 3300 XL 8 mm proximity probe for a matched noncontact displacement-measurement chain.

      Application scope: Select the probe, cable and Proximitor configuration for the actual machine target and monitoring function. Confirm mounting, usable range and channel settings before replacement.
      Follow the applicable manufacturer installation instructions and site isolation procedure. Verify the complete measuring chain before commissioning.
      Match the complete chain

      Match the 1 m probe to a 1 m Proximitor system, or use a 4 m extension for a 5 m system or an 8 m extension for a 9 m system.

      Check the mounting interface

      Confirm 3/8-24 UNF thread engagement, the 0.0 in unthreaded section and 3.0 in case length. Do not force a metric and imperial thread combination.

      Set the operating gap

      Use a target and gap appropriate to the 2.0 mm matched-system linear range. Verify the channel output with the actual target before release to service.

      Protect the cable and connector

      Keep the cable bend radius at least 25.4 mm. Tighten ClickLoc connectors by hand, protect the joint and avoid applying cable tension through the connector.

      Review exposure and approvals

      This order uses standard cable, not FluidLoc. Match the supplied approval marking to the area requirements and protect connections against the actual moisture and oil exposure.

      Verify the completed channel

      Check identity, electrical continuity, gap response and monitor scaling with an approved test procedure. Resolve unstable output, damaged cable or a mismatched component before returning the channel to service.

      Alternative Names

      Bently Nevada 330102-00-30-10-01-05 330102-00-30-10-01-05 armored proximity probe

      Technical notes

      System relationship: Match the 1 m probe to a 1 m Proximitor system, or use a 4 m extension for a 5 m system or an 8 m extension for a 9 m system. Range and sensitivity are complete-system ratings under the applicable reference conditions.

      Installation limits: Match the AISI 4140 steel reference target or assess the actual target material. Confirm cable routing, operating gap and the supplied approval marking before commissioning.

      Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN.

      FAQ View All FAQ

      • Which measuring chain is required for 330102-00-30-10-01-05?
        Match the 1 m probe to a 1 m Proximitor system, or use a 4 m extension for a 5 m system or an 8 m extension for a 9 m system. System sensitivity and linear range apply to the matched chain, not to the probe alone.
      • What does the mounting code specify on 330102-00-30-10-01-05?
        The selected case has a 3/8-24 UNF thread, 0.0 in unthreaded length and 3.0 in overall case length. Compare these interfaces with the installed bracket or housing; nominal tip diameter does not establish mechanical interchangeability.
      • How is the cable configuration of 330102-00-30-10-01-05 identified?
        The total probe length is 1.0 m. Connector option 01 provides a miniature coaxial ClickLoc connector with a connector protector and standard cable. The armored case selection does not convert the cable into a FluidLoc pressure barrier.
      • What resistance check is useful for 330102-00-30-10-01-05?
        The nominal center-to-outer conductor DC resistance of this 1 m probe is 7.59 ±0.50 ohms. Use a suitable isolated test procedure and inspect the connector and lead as well; resistance alone does not establish a correctly calibrated channel.
      • What photos should be requested before buying 330102-00-30-10-01-05?
        Request current photos of the complete 330102-00-30-10-01-05 marking, probe tip, threaded case, armored lead and ClickLoc connector. Compare the supplied approval marks and any revision or serial identification with the installed requirement before approving the offer.
      • Does the quotation for 330102-00-30-10-01-05 include the Proximitor sensor?
        Supply scope: Confirmed in quotation. Itemize the probe, any extension cable, Proximitor sensor, mounting hardware, connector protection and accompanying documents. A compatibility reference does not mean the associated components are supplied.
      • How are quantity and dispatch agreed for 330102-00-30-10-01-05?
        Provide the quantity and required delivery date. Confirm available quantity, the planned dispatch date and the event that starts the agreed lead time in the quotation. Swift global dispatch describes the shipping service and does not establish current inventory.
      • Which documents and warranty terms should be confirmed for 330102-00-30-10-01-05?
        Specify the required inspection records, product identification and applicable approval documents before ordering. Confirm their availability for the supplied unit together with warranty period, coverage, exclusions and claim procedure; no certificate package is automatically included.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.