Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330102-00-12-10-01-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330102-00-12-10-01-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330102-00-12-10-01-05
-
Estimated shipping dimensions:1.5x1.3x65cm
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL 8 mm
-
Thread:3/8-24 UNF
-
Construction:Standard mount with armor
-
Unthreaded length:0.0 in
-
Case length:1.2 in
-
Total length:1.0 m
-
Connector option:01, ClickLoc with connector protector
-
Approval option:05, CSA/ATEX/IECEx
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330102-00-12-10-01-05 adds stainless-steel lead armor and a protected ClickLoc termination to a one-metre 3300 XL 8 mm probe.
- Uses the armored 330102 probe construction for physical cable protection.
- Provides a fully threaded 1.2 in standard-mount case.
- Includes a one-metre standard lead and connector protector.
- Selects the multiple-approval execution identified by code 05.
Armor protects the probe lead from mechanical damage but does not replace correct routing or strain relief. The protector must be installed without contaminating the ClickLoc contact surfaces.
Important Notice: Match the complete 330102-00-12-10-01-05 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Bently Nevada 330102-00-12-10-01-05 Manuals & Downloads
Bently Nevada 330102-00-12-10-01-05 Official Technical Reference Excerpt (PDF)Bently Nevada 330102-00-12-10-01-05 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Shaft-relative vibration
Uses the installed probe position to observe dynamic shaft motion in imperial-threaded machinery locations.
Static position
Supports non-contact measurement of shaft position inside the calibrated transducer-system range.
Machine protection input
Feeds the matched Proximitor sensor and monitoring channel used for alarms and protection logic.
Commissioning verification
Allows gap, signal response and channel direction to be checked after installation.
Before installing Bently Nevada 330102-00-12-10-01-05, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330102-00-12-10-01-05 marking before removing the installed probe.
2
Confirm the mounting interface is 3/8-24 UNF and that the case provides adequate thread engagement.
3
Keep the probe, extension cable and Proximitor sensor at the documented matched 3300 XL 8 mm system electrical length.
4
Protect the probe tip, coaxial lead and ClickLoc connector from impact, contamination and sharp bends.
5
Route the lead away from hot surfaces, rotating parts and locations that can crush or abrade the cable.
6
Use the connector protector only when it is included in the complete ordering code.
7
Set the probe gap with the matched system and the controlled target material before enabling protection.
8
Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Technical notes
Match the complete 330102-00-12-10-01-05 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
FAQ View All FAQ
-
What does the 330102 prefix identify in 330102-00-12-10-01-05?It identifies the 3/8-24 UNF standard-mount 3300 XL 8 mm probe with armor.
-
Is the case of 330102-00-12-10-01-05 partly unthreaded?No. Code 00 specifies 0.0 in unthreaded length.
-
Translate the 12 case segment in 330102-00-12-10-01-05 into its physical length.Code 12 specifies a 1.2 in overall case.
-
Which connector hardware accompanies 330102-00-12-10-01-05?Code 01 selects the miniature ClickLoc connector with its connector protector.
-
How does the final 05 qualify the 330102-00-12-10-01-05 probe execution?Code 05 selects the CSA, ATEX and IECEx approval execution listed for the family.
-
What does the stainless-steel armor protect on 330102-00-12-10-01-05?It provides mechanical protection around the probe lead; the lead still requires proper bend radius and support.
-
Which electrical length does the probe contribute in 330102-00-12-10-01-05?It contributes a 1.0 m probe lead to the matched system.
-
What must be inspected before mating 330102-00-12-10-01-05?Inspect the ClickLoc contacts, protector, armor termination and lead condition, then confirm the matched 8 mm system.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.