Bently Nevada 31000-30-05-15-049-01-02 is an evidence-bounded configured 31000 proximity-probe housing assembly. Exact model identity is documented by the cited manufacturer source.
- Exact requested identity: 31000-30-05-15-049-01-02
- Product class: configured 31000 proximity-probe housing assembly
- Probe option: 30 - 3300 XL 8 mm, protector, multiple approvals
- Cable: 05 - 0.5 m
System role: It is a 31000 housing configured with an approved 3300 XL 8 mm probe with protector and approvals, 0.5 m cable, 1.5 in standoff, 4.9 in penetration, one NPT fitting with two plugs, and 3/4-14 NPT mounting thread. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Maintain the documented C-plus-D length limit, sleeve support, fittings and mounting-thread requirements for the installed machine case. The housing supplies mechanical and environmental protection; the cited 31000 enclosure is not explosion-proof. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 31000-30-05-15-049-01-02 physical label and installed-system documentation before use.
Apter Power 31000-30-05-15-049-01-02 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited manufacturer official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 31000-30-05-15-049-01-02.
System documentationProvides a source-traceable boundary for the documented 31000 external proximity probe housing system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 31000-30-05-15-049-01-02 label, revision and installed-system documentation before use.
2The housing supplies mechanical and environmental protection; the cited 31000 enclosure is not explosion-proof.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
