Which configuration should be restored after replacing 125760-01?

Restore the approved 3500/20 Rack Interface System slot, channel or interface configuration and verify that every connected circuit retains its original assignment.

How can 125760-01 be commissioned for transient-data collection?

Apply a controlled input or command, review the model-specific diagnostics and prove the expected measurement, indication and protection response before releasing the channel.

What technical value deserves special attention when checking 125760-01?

Verify the published data rate value of 9600 baud fixed against the installed configuration and test record.

Can 125760-01 be exchanged with another 3500 I/O or monitor execution?

Only when the complete part number, termination style, transducer or interface type and approved rack configuration match the installed duty; do not transfer settings from an adjacent model.

What evidence should be retained after 125760-01 returns to service?

Retain the full 125760-01 identity, as-left connections, restored configuration, final diagnostics and the controlled functional-test result for dynamic waveform acquisition.

Which rack hardware must be matched before installing 125760-01?

Match 125760-01 to the documented 3500 rack rear slot and 3500/20 RIM; confirm the front/rear slot pairing and the complete physical marking before connection.

What as-found information should an engineer record before removing 125760-01?

Record every channel or port assignment, connector identity, configured function, cable tag and diagnostic state associated with 125760-01.

How should 125760-01 be isolated before field wiring is disturbed?

Place the protected machine in its approved maintenance state, isolate rack and field energy applicable to TDXnet, TDIX or DDIX processor, and prove the terminals safe before disconnection.

125760-01 | Bently Nevada | Data Manager I/O Modul

Name: 125760-01
Brand: Bently Nevada
SKU: 125760-01

125760-01

Data Manager I/O Module

In Stock

Ships by Sunday, September 13

Fast Shipping Available

Technical specifications for 125760-01

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

125760-01

Estimated shipping dimensions:

2.5x24.1x10.2 cm

Weight:

0.4 kg

Tariff Code:

8537101190

Counliy of origin:

USA

I/O module type:

Data Manager

Communication port sets:

Protocol:

Bently Nevada proprietary

Data rate:

9600 baud fixed

Static data processors:

TDIX; DDIX

Dynamic data processors:

TDIX; DDIX

Maximum cable length:

3 m

Rack connector interface:

RS422

Rack connector data rate:

38.4 kbaud maximum

Rear rack space:

1 full-height slot

Matched front module:

3500/20 RIM

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 125760-01 is the Data Manager I/O module for the 3500/20 Rack Interface Module. It transfers static and dynamic rack data to supported external communication and acquisition processors.

Provides two proprietary data-interface port sets at the rear of a 3500 rack
Transfers static and dynamic monitoring data to supported external processors
Connects the rack to TDXnet, TDIX or DDIX acquisition architectures
Maintains the short, fixed-rate communications path specified for the Data Manager interface

125760-01 installs with 3500 rack rear slot, 3500/20 RIM, TDXnet, TDIX or DDIX processor, Approved static and dynamic data cables in an engineered 3500/20 Rack Interface System configuration.

The commissioning workflow covers installed-hardware matching, controlled start-up and functional verification for this data manager i/o module.

Important Notice: Confirm the complete 125760-01 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.

Apter Power 125760-01 Manuals and Guides

Apter Power 125760-01 Product Technical Reference PDF Bently Nevada 125760-01 Official Manual PDF

The first document is an Apter Power model-specific technical reference. The second supports model-specific installation, configuration and engineering verification.

Transient-data collectionProvides two proprietary data-interface port sets at the rear of a 3500 rack

Dynamic waveform acquisitionTransfers static and dynamic monitoring data to supported external processors

Rack static-value exportConnects the rack to TDXnet, TDIX or DDIX acquisition architectures

Legacy DDIX or TDIX interface restorationMaintains the short, fixed-rate communications path specified for the Data Manager interface

Read the applicable Bently Nevada installation instructions before work. Verify 125760-01 and the installed 3500/20 Rack Interface System configuration.

1Match 125760-01 to the rear slot of the designated 3500/20 RIM.

2Stop external acquisition sessions before disconnecting either Data Manager port set.

3Label static and dynamic data cables separately at both ends.

4Do not substitute a host-configuration serial cable for the Data Manager connection.

5Keep each TDIX or DDIX cable path within the published three-metre limit.

6Inspect rear connectors and use ESD controls before inserting the module.

7Restore the original external-processor channel and rack assignment.

8Confirm both static values and dynamic waveform data after restart.

FAQS

Which configuration should be restored after replacing 125760-01?

Restore the approved 3500/20 Rack Interface System slot, channel or interface configuration and verify that every connected circuit retains its original assignment.
How can 125760-01 be commissioned for transient-data collection?

Apply a controlled input or command, review the model-specific diagnostics and prove the expected measurement, indication and protection response before releasing the channel.
What technical value deserves special attention when checking 125760-01?

Verify the published data rate value of 9600 baud fixed against the installed configuration and test record.
Can 125760-01 be exchanged with another 3500 I/O or monitor execution?

Only when the complete part number, termination style, transducer or interface type and approved rack configuration match the installed duty; do not transfer settings from an adjacent model.
What evidence should be retained after 125760-01 returns to service?

Retain the full 125760-01 identity, as-left connections, restored configuration, final diagnostics and the controlled functional-test result for dynamic waveform acquisition.
Which rack hardware must be matched before installing 125760-01?

Match 125760-01 to the documented 3500 rack rear slot and 3500/20 RIM; confirm the front/rear slot pairing and the complete physical marking before connection.
What as-found information should an engineer record before removing 125760-01?

Record every channel or port assignment, connector identity, configured function, cable tag and diagnostic state associated with 125760-01.
How should 125760-01 be isolated before field wiring is disturbed?

Place the protected machine in its approved maintenance state, isolate rack and field energy applicable to TDXnet, TDIX or DDIX processor, and prove the terminals safe before disconnection.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

125760-01

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 125760-01

Technical specifications for 125760-01

Information

Information

Technical notes

Technical notes

Our World，Made Possible By Manufacturing.

FAQS

You May Also Like

Product Browsing History

We’re Here When You Need Us

Enquire

Call Us

Live Chat

Cookies

Individual privacy preferences

125760-01

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 125760-01

Technical specifications for 125760-01

Information

Information

Technical notes

Technical notes

Our World，Made Possible By Manufacturing.

FAQS

You May Also Like

Product Browsing History

We’re Here When You Need Us

Enquire

Call Us

Live Chat

Subscribe To Our Newsletter

Cookies

Individual privacy preferences