Which installed system position is intended for X20CP3585?

Install X20CP3585 only in the documented B&R X20 PLC position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does X20CP3585 handle?

Its documented duty is redundant plc logic, communication interfaces and powerlink data; the official record lists main memory as 256 MB DDR2 SDRAM.

Which companion hardware must be matched to X20CP3585?

Match X20CP3585 with X20 bus base and I/O and three approved interface modules, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring X20CP3585?

Verify interfaces: Ethernet; POWERLINK; USB. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing X20CP3585?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 PLC configuration.

Which isolation and handling checks apply to X20CP3585?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20CP3585.

How should an engineer commission X20CP3585?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended redundant process controller function.

Can X20CP3585 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, processor and approved system revision.

B&R X20CP3585 Redundancy-capable X20 controller

Name: X20CP3585
Brand: B&R
SKU: X20CP3585

X20CP3585

Redundancy-capable X20 controller

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for X20CP3585

Manufacturer:

B&R

Product Category:

PLC Systems

Spare Part Number:

X20CP3585

Estimated shipping dimensions:

15.3x8x10.1cm

Weight:

0.66 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Processor:

Intel Atom; 1 GHz

Main memory:

256 MB DDR2 SDRAM

Modular interface slots:

Interfaces:

Ethernet; POWERLINK; USB

Application storage:

CompactFlash

Redundancy:

Supported

Cooling:

Fanless

Information

Overview Manuals Common Applications Product Precautions

B&R X20CP3585 is a redundancy-capable X20 controller that executes control applications and connects modular communication interfaces within an engineered X20 station.

Coordinates controller and motion tasks across an X20 automation station
Adds modular interfaces for network and fieldbus connectivity
Supports redundancy-capable controller architectures
Exchanges automation data through Ethernet and POWERLINK

X20CP3585 mounts on a compatible X20 bus base and operates with approved X20 I/O modules, interface modules, CompactFlash storage and an Automation Studio project. It supports coordinated machine and process-control duties where the installed controller pair and communication topology have been engineered for redundancy.

Important Notice: Confirm the complete X20CP3585 marking, partner controller, bus base, interface modules, terminal wiring, grounding, CompactFlash image, Automation Studio project, firmware compatibility, redundancy role, synchronization state and controlled diagnostics before commissioning or replacement.

Apter Power B&R X20CP3585 Manuals and Guides

Apter Power B&R X20CP3585 Product and System Technical Reference PDF Apter Power B&R X20CP3585 Installation and Commissioning Workbook PDF

The first document presents model-specific technical and system data. The second provides a distinct installation, connection, commissioning and acceptance workflow.

Redundant process controller

Runs control logic with an engineered standby partner.

Multi-interface machine control

Hosts multiple communication interfaces.

POWERLINK automation cell

Coordinates deterministic machine devices.

Controller-pair replacement

Restores one controller without breaking redundancy identity.

Follow the applicable B&R X20 installation and service instructions. Verify X20CP3585, its bus base, partner controller and engineered redundancy configuration before work.

Confirm the complete X20CP3585 marking, installed X20 bus-base position and assigned partner controller.

Place the controlled machine or process in the approved maintenance state and isolate all relevant supplies.

Use ESD-safe handling and protect module contacts, keyed connectors and interface slots from contamination.

Record the installed interface modules, Ethernet and POWERLINK topology, terminal wiring and protective grounding before removal.

Preserve the CompactFlash image, Automation Studio project, firmware revision and configured controller identity.

Verify the active and standby role assignment, synchronization state and approved redundancy settings before restoration.

Reconnect communication interfaces and grounding to the documented positions before controlled energization.

Review controller and network diagnostics, then complete a controlled redundancy switchover test before service release.

FAQS

Which installed system position is intended for X20CP3585?

Install X20CP3585 only in the documented B&R X20 PLC position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does X20CP3585 handle?

Its documented duty is redundant plc logic, communication interfaces and powerlink data; the official record lists main memory as 256 MB DDR2 SDRAM.
Which companion hardware must be matched to X20CP3585?

Match X20CP3585 with X20 bus base and I/O and three approved interface modules, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring X20CP3585?

Verify interfaces: Ethernet; POWERLINK; USB. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing X20CP3585?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 PLC configuration.
Which isolation and handling checks apply to X20CP3585?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20CP3585.
How should an engineer commission X20CP3585?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended redundant process controller function.
Can X20CP3585 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, processor and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

X20CP3585

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for X20CP3585

Technical specifications for X20CP3585

Information

Information