Which installed system position is intended for X20AI2237?

Install X20AI2237 only in the documented B&R X20 analog I/O position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does X20AI2237 handle?

Its documented duty is two isolated +/-10 v analog input signals; the official record lists signal range as +/-10 V.

Which companion hardware must be matched to X20AI2237?

Match X20AI2237 with X20BM11 or X20BM15 bus module and X20TB12 terminal block, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring X20AI2237?

Verify isolation: Channel-to-channel and sensor-supply isolation. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing X20AI2237?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 analog I/O configuration.

Which isolation and handling checks apply to X20AI2237?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20AI2237.

How should an engineer commission X20AI2237?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended precision position transducer input function.

Can X20AI2237 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, inputs and approved system revision.

B&R X20AI2237 Two-channel isolated analog voltage input module

Name: X20AI2237
Brand: B&R
SKU: X20AI2237

X20AI2237

Two-channel isolated analog voltage input module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for X20AI2237

Manufacturer:

B&R

Product Category:

General Automation

Spare Part Number:

X20AI2237

Estimated shipping dimensions:

9.7x5.8x1.1cm

Weight:

0.02 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Inputs:

Signal range:

+/-10 V

Resolution:

16 bit

Isolation:

Channel-to-channel and sensor-supply isolation

Bus modules:

X20BM11 or X20BM15

Terminal block:

X20TB12

Timing:

NetTime timestamp support

Information

Overview Manuals Common Applications Product Precautions

B&R X20AI2237 is two-channel isolated analog voltage input module. It acquires two high-resolution isolated voltage signals for X20 process measurement and control.

Measures two bipolar voltage channels
Uses sixteen-bit conversion
Isolates the channels from one another
Supports NetTime-related acquisition

X20AI2237 operates with X20BM11 or X20BM15 bus module, X20TB12 terminal block, bipolar voltage sensors, Automation Studio channel configuration.

Engineered applications include Precision position transducer input, Isolated voltage measurement, Synchronized analog acquisition, Analog-input slice renewal.

Important Notice: Confirm the bus module and terminal block, preserve channel polarity and shield routing, then simulate negative, zero and positive values.

Apter Power B&R X20AI2237 Manuals and Guides

Apter Power B&R X20AI2237 Product and System Technical Reference PDF Apter Power B&R X20AI2237 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Precision position transducer input

Acquires accurate sensor voltage values.

Isolated voltage measurement

Separates channels in mixed-ground installations.

Synchronized analog acquisition

Supports time-related measurement sequences.

Analog-input slice renewal

Restores the channel scaling and wiring identity.

Read the applicable B&R instructions before work. Verify X20AI2237 and the installed B&R X20 analog I/O configuration.

Verify the full X20AI2237 marking and its assigned B&R X20 analog I/O position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and two isolated +/-10 v analog input signals field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed X20BM11 or X20BM15 bus module and X20TB12 terminal block against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended precision position transducer input function and retain the final test result.

FAQS

Which installed system position is intended for X20AI2237?

Install X20AI2237 only in the documented B&R X20 analog I/O position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does X20AI2237 handle?

Its documented duty is two isolated +/-10 v analog input signals; the official record lists signal range as +/-10 V.
Which companion hardware must be matched to X20AI2237?

Match X20AI2237 with X20BM11 or X20BM15 bus module and X20TB12 terminal block, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring X20AI2237?

Verify isolation: Channel-to-channel and sensor-supply isolation. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing X20AI2237?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 analog I/O configuration.
Which isolation and handling checks apply to X20AI2237?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20AI2237.
How should an engineer commission X20AI2237?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended precision position transducer input function.
Can X20AI2237 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, inputs and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

X20AI2237

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for X20AI2237

Technical specifications for X20AI2237

Information

Information