Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for HIEE300025R2 VDA330 A02
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Record the complete HIEE300025R2 VDA330 A02 board marking, preserving the R2 and A02 identifiers together. Use the same identity on the enquiry and quotation.
-
Check the offered item before ordering
Request available photos of the ABB board labels and front-panel multipin connectors. Have your maintenance team compare the offered HIEE300025R2 VDA330 A02 with the installed rack and applicable ABB documentation.
Technical specifications for HIEE300025R2 VDA330 A02
-
Manufacturer:ABB
-
Product Category:General Automation
-
Spare Part Number:VDA330 A02
-
Weight:0.7 kg
-
Tariff Code:8537101190
-
Board form:Rack-format open circuit board
-
ABB label position:Printed labels along the rear connector edge
-
Field cable access:Front faceplate
-
Front connector layout:Two rows of numbered D-sub sockets
-
Rear mating points:Two long multipin plug connectors
-
Front indications:Two small status indicators visible
-
Board architecture:Repeated IC and passive-component groups
-
Faceplate:Screw-secured rack faceplate and retaining handles
-
Cable control:Identify each D-sub lead by original socket position
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- This ABB interface board brings several separately cabled front connections into one rack position. A controlled exchange depends on the destination and position of each installed harness.
Cable destination: Trace each front harness to its equipment end before releasing a connector
Connector security: Check D-sub screw locks and harness strain relief after reconnection
Port function: Obtain signal assignments from the installed drawing, not from identical connector shells
Circuit proof: Exercise each restored cable path individually and retain the result
Connector security: Check D-sub screw locks and harness strain relief after reconnection
Port function: Obtain signal assignments from the installed drawing, not from identical connector shells
Circuit proof: Exercise each restored cable path individually and retain the result
The unit has two rows of multiple D-sub connectors with numbered positions, two long multipin rear connectors and status indicators near the front panel and repeated interface circuits across the board. These physical details support receiving inspection and a side-by-side comparison with the removed unit. They do not by themselves identify a wiring standard or electrical rating.
Record every D-sub cable identifier and front-panel socket position before removal; physically identical plugs can serve different circuits. Match R2 and A02 as a complete pairing and compare the host slot and cable schedule; connector shape alone does not prove interchangeability. A photograph of the existing slot and each plug provides a useful baseline before the cabinet is isolated.
The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone. Commissioning therefore depends on the actual ABB equipment drawing, circuit labels and approved site test plan; distinguish a physical connector match from functional compatibility.
Record every D-sub cable identifier and front-panel socket position before removal; physically identical plugs can serve different circuits. Match R2 and A02 as a complete pairing and compare the host slot and cable schedule; connector shape alone does not prove interchangeability. A photograph of the existing slot and each plug provides a useful baseline before the cabinet is isolated.
The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone. Commissioning therefore depends on the actual ABB equipment drawing, circuit labels and approved site test plan; distinguish a physical connector match from functional compatibility.
ABB board identity reference: HIEE300025R2 and VDA330 A02. Verify the destination of every front harness against the installed cable schedule before substitution.
Technical downloads for ABB HIEE300025R2 VDA330 A02: an Apter Power technical reference and an Apter Power installation and commissioning guide.
-
Apter Power board identity reference for ABB HIEE300025R2 VDA330 A02
Apter Power authored board identity reference - PDF, 5 pages. Marking, visible interfaces, service boundaries and acceptance checks. -
ABB HIEE300025R2 VDA330 A02 installation guide
Prepared by Apter Power - PDF, 2 pages. Identification, installation checks, commissioning and fault isolation.
The reference and installation guide support component identification and service planning. Apply the approved system and site procedures during work.
System and supply context: The board belongs to an installed ABB cabinet or rack; the host slot, external cable harness and powered field circuits define the complete installation.
Application scope: Multi-cable board exchange in an ABB rack or cabinet. The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone.
Application scope: Multi-cable board exchange in an ABB rack or cabinet. The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone.
-
Exact-position exchange
Match R2 and A02 as a complete pairing and compare the host slot and cable schedule; connector shape alone does not prove interchangeability. -
Cable-map retention
Record every D-sub cable identifier and front-panel socket position before removal; physically identical plugs can serve different circuits. -
Cabinet maintenance
Compare faceplate hardware, rear connectors and board clearance with the installed assembly before a planned shutdown. -
Post-installation proof
Use the host system diagnostic and circuit test procedure to verify the functions connected to the actual board position.
Installation and commissioning checks for ABB HIEE300025R2 VDA330 A02.
Isolate before handling
Follow the cabinet lockout and discharge procedure before touching the open circuit board or rear mating contacts.
Capture the baseline
Record every D-sub cable identifier and front-panel socket position before removal; physically identical plugs can serve different circuits.
Control electrostatic damage
Handle the board by its faceplate or edges and use the site-approved ESD work area and packaging.
Inspect both mating sides
Check front sockets, rear pins, retaining hardware and guide rails for bent contacts or contamination.
Avoid function assumptions
The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone.
Prove the installed circuit
Restore power under the approved plan; compare indicators, host diagnostics and the relevant field signals with the pre-work record.
Alternative Names
ABB HIEE300025R2 VDA330 A02
ABB HIEE300025R2 / VDA330 A02
HIEE300025R2-VDA330-A02
Technical notes
Installation relationship: The board functions within its original ABB rack position and attached field-cable arrangement; retain the full HIEE300025R2 VDA330 A02 marking.
Connection boundary: The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone.
Technical identity: ABB HIEE300025R2 / VDA330 A02 markings and visible connector layout on supplied unit photographs. Use the matching installed equipment drawing for circuit ratings and pin assignments.
FAQ View All FAQ
-
What identifies the exact ABB HIEE300025R2 VDA330 A02 assembly during replacement?Use the complete HIEE300025R2 and VDA330 A02 marking together with the photographed faceplate and rear connector arrangement. A shortened family code does not establish the same revision or circuit role.
-
How should cables be recorded before removing ABB HIEE300025R2 VDA330 A02?Record every D-sub cable identifier and front-panel socket position before removal; physically identical plugs can serve different circuits. Mark both cable ends and the original socket or terminal position so reassembly is traceable.
-
Does the visible connector arrangement on ABB HIEE300025R2 VDA330 A02 define its pinout?The connector pattern is visible; signal direction, pinout and protocol are not established by the exterior marking alone. Use the installed ABB wiring drawing and verify each lead before connecting field power.
-
Can another ABB board with a similar faceplate replace HIEE300025R2 VDA330 A02?Match R2 and A02 as a complete pairing and compare the host slot and cable schedule; connector shape alone does not prove interchangeability. Check the full code, board revision, rear mating interface and host configuration before considering an alternative.
-
What should be inspected on the rear of ABB HIEE300025R2 VDA330 A02?Inspect two long multipin rear connectors, guide alignment and contact condition. A bent or contaminated mating pin can create an intermittent fault even when the front wiring appears correct.
-
Which ABB HIEE300025R2 VDA330 A02 settings or configuration should be preserved?Record the host slot, any visible switch positions, board-revision labels and the connected circuit mapping before removal. Restore only settings supported by the installed system documentation.
-
What does a front indicator on ABB HIEE300025R2 VDA330 A02 prove?An illuminated indicator shows a local state only; its diagnostic meaning depends on the matching ABB equipment documentation. Confirm host alarms and measured circuit behavior before treating it as a pass.
-
What functional check completes an ABB HIEE300025R2 VDA330 A02 exchange?Verify the replacement marking and cable map, energize under the approved site plan, then check the host diagnostic state and every affected connected circuit against the as-left acceptance record.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.