ABB DAI05 is an evidence-bounded sixteen-channel 4-20 mA analog input module. ABB identifies DAI05 as a sixteen-channel 4-20 mA analog current input module with 12-bit conversion.
- Channels: 16 analog inputs
- Input: 4-20 mA
- Conversion: 12 bit; 5 microampere nominal step
- Input resistance: 250 ohm
System role: DAI05 acquires sixteen 4-20 mA process-current signals in the legacy Freelance rack I/O architecture. Only facts stated by the cited ABB official sources are published; sibling, predecessor and successor data are not transferred. Architecture boundary: The official certificate lists a nominal 5 microampere conversion step and 250 ohm input resistance. Exact revision, firmware, host, connector and field-wiring details must be checked against the physical unit and approved project documentation. For maintenance, replacement or migration work, verify the complete nameplate, companion hardware, wiring, configuration and commissioning procedure before returning equipment to service.
Important Notice: Verify DAI05, the rack slot, 4-20 mA loop wiring and termination before use.
Apter Power DAI05 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB DAI05.
Freelance rack documentationProvides a source-traceable boundary for the documented controller, I/O or link-module role.
Commissioning reviewGuides identity, companion-hardware, cable, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from sibling modules, later remote I/O and modern controller platforms.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and Freelance rack configuration.
1Verify DAI05, the rack slot, 4-20 mA loop wiring and termination before use.
2DAI05 is not DAI01 or DAI03; do not transfer their 0-20 mA option or input resistance.
3De-energize the rack and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up Freelance configuration and controller data before replacement or migration work.
5Verify every rack slot, companion module, system cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model, suffix or successor.
7Perform a documented functional test and confirm diagnostics, alarms and configured fail-state behavior after work.
8Origin, HS code, dimensions and logistics weight remain unpublished without exact ABB model-level evidence.
Videos
News
Applications
