Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 140ACI05100SC
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 140ACI05100SC
-
Product Category:PLC Systems
-
Spare Part Number:140ACI05100SC
-
Estimated shipping dimensions:4x10.8x25cm
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:France
-
Product type:Selectable current-or-voltage analog input module
-
Platform:Quantum Automation Series
-
Input count:32 single-ended analog inputs
-
Channel grouping:4 groups of 8
-
Current ranges:4 to 20 mA; 0 to 20 mA
-
Voltage ranges:+/-10 V DC; 0 to 10 V DC; 0 to 5 V DC; 1 to 5 V DC
-
Isolation:500 V AC channel-to-backplane; 15 V group-to-group; 0 V channel-to-channel within a group
-
Data formats:12-bit; signed integer; unsigned integer; scaled 0 to 10,000
Information
Overview
Manuals
Common Applications
Product Precautions
The 140ACI05100SC collects thirty-two single-ended analog signals in four isolated channel groups and transfers their configured values and status to a Quantum controller.
- 32 single-ended analog inputs
- Four configurable groups of eight channels
- Current or voltage input selection
- Over-range, under-range and active-notch-filter functions
Configure each group of eight channels for its approved current or voltage range. Use shielded twisted-pair field cable and ground each shield at one end only as directed by the installation manual. Match the field terminal block, channel map and register allocation to the approved Quantum project. Record the Ready, Active, Fault and channel LED states before removal and after commissioning.
Important Notice: Confirm the complete Spectrum Controls 140ACI05100SC marking, installed hardware arrangement, circuit assignments and cabinet records before installation or replacement.
Spectrum Controls 140ACI05100SC Manuals & Downloads
Spectrum Controls 140ACI05100SC Technical Reference (PDF)Spectrum Controls 140ACI05100SC Installation & Commissioning Guide (PDF)
The first document presents model-specific technical information; the second provides a separate installation, verification and acceptance workflow.
High-density analog acquisition
Collects thirty-two approved current or voltage signals.
Grouped range configuration
Applies one approved range to each group of eight inputs.
Process and utility monitoring
Supports controlled multi-loop acquisition in a Quantum system.
Channel diagnostics
Reports over-range, under-range and front-panel status information.
Read the applicable Spectrum Controls instructions before work. Verify the complete 140ACI05100SC identity, installed hardware arrangement and every connected circuit before isolation or replacement.
1
Record the complete 140ACI05100SC marking.
2
Confirm the Quantum rack and exact slot position.
3
Isolate field wiring and rack power before removal.
4
Verify each group-of-eight input range and data format.
5
Check every channel label and shield termination.
6
Confirm the terminal block and connector arrangement.
7
Review Ready, Active, Fault and channel indications.
8
Document all restored readings and diagnostics before release.
Technical notes
Configure each eight-channel group of the 140ACI05100SC for one approved current or voltage range and the matching data format. Use shielded twisted-pair wiring, terminate shields as required and confirm every restored analog reading and diagnostic indication.
FAQ View All FAQ
-
What function does Spectrum Controls 140ACI05100SC perform in a Quantum rack?Spectrum Controls 140ACI05100SC functions as a 32-channel selectable current-or-voltage analog input module for the Quantum platform.
-
How many analog inputs does 140ACI05100SC provide?The 140ACI05100SC provides 32 single-ended analog inputs.
-
How are the 140ACI05100SC channels organized?The 140ACI05100SC organizes its channels into four groups of eight.
-
Which current ranges can be selected on 140ACI05100SC?The 140ACI05100SC allows each configured group to use either a 4–20 mA or 0–20 mA current range.
-
Which voltage ranges are available on 140ACI05100SC?The 140ACI05100SC supports ±10 V DC, 0–10 V DC, 0–5 V DC and 1–5 V DC ranges.
-
What isolation levels apply to 140ACI05100SC?The 140ACI05100SC provides 500 V AC channel-to-backplane isolation, 15 V group-to-group isolation and no channel-to-channel isolation within a group.
-
Which diagnostic indications does 140ACI05100SC provide?The 140ACI05100SC reports over-range, under-range, Ready, Active, Fault and channel-status indications.
-
What should be verified before replacing 140ACI05100SC?Before replacing the 140ACI05100SC, technicians should verify the full marking, rack and slot, four group configurations, data format, terminal block and every channel label.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.