Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 0950-3017 PS605-0101
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 0950-3017 PS605-0101
-
Manufacturer:Yokogawa
-
Product Category:DCS Systems
-
Spare Part Number:0950-3017 PS605-0101
-
Estimated shipping dimensions:12.7x12.7x2.5cm
-
Weight:0.2 kg
-
Tariff Code:8537101190
-
Counliy of origin:Japan
-
Module function:Control-system power supply
-
Power path:Rack and control-electronics supply
-
Hardware form:Plug-in power assembly
-
Electrical interface:Keyed rack connector
-
Grounding boundary:Rack protective-earth system
-
Supply architecture:Installed station power path
-
Isolation state for service:De-energized module replacement
-
Service method:Like-for-like installed-system replacement
Information
Overview
Manuals
Common Applications
Product Precautions
Within an installed Yokogawa control rack, 0950-3017 PS605-0101 forms the maintained power-conversion point whose connector keying and electrical nameplate must remain matched to the station.
- Provides the power-conversion function for the assigned control hardware.
- Uses a paired part identity that must be retained together.
- Fits a keyed installed rack position rather than a generic bench supply role.
- Requires the installed nameplate and load arrangement to be captured before replacement.
0950-3017 PS605-0101 should be matched to the documented system position, companion hardware and retained project configuration before the channel or station is returned to control.
Important Notice: Preserve the complete 0950-3017 PS605-0101 identity and verify its documented electrical, network or signal response before release.
Yokogawa 0950-3017 PS605-0101 Manuals & Downloads
Yokogawa 0950-3017 PS605-0101 Technical Reference (PDF)Yokogawa 0950-3017 PS605-0101 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Legacy control-station maintenance
Restores the recorded rack power path during planned service.
Power fault recovery
Replaces a failed assembly after upstream and downstream faults are isolated.
Critical spare planning
Maintains a verified spare for the exact installed hardware execution.
Rack refurbishment
Supports controlled renewal when connectors and electrical ratings are documented.
Before installing Yokogawa 0950-3017 PS605-0101, confirm the documented system, interfaces and controlled configuration.
1
Record both 0950-3017 and PS605-0101 from the installed label.
2
Isolate every upstream source before touching the assembly.
3
Document downstream loads and any configured redundant power path.
4
Compare all nameplate input and output ratings before insertion.
5
Inspect connector keying and contact condition without modifying the rack.
6
Restore protective earth and all power conductors to their original positions.
7
Energize with downstream load observation and fault indicators visible.
8
Confirm stable rack power and controller operation before release.
Technical notes
Preserve the complete 0950-3017 PS605-0101 identity and verify its documented electrical, network or signal response before release.
FAQ View All FAQ
-
Why are both references retained in Yokogawa 0950-3017 PS605-0101?The two markings identify one maintained power-supply assembly and should be recorded together for replacement control.
-
Where does Yokogawa 0950-3017 PS605-0101 sit in the control power path?It provides rack-level power conversion and distribution for the installed Yokogawa control hardware.
-
Which ratings govern a Yokogawa 0950-3017 PS605-0101 replacement?The complete input, output, frequency and load ratings printed on the installed nameplate govern the replacement.
-
How should upstream isolation be proved before removing Yokogawa 0950-3017 PS605-0101?Identify every incoming source, apply the approved lockout procedure and verify absence of voltage at the documented terminals.
-
What connector inspection is appropriate for Yokogawa 0950-3017 PS605-0101?Check keying, contact alignment, discoloration and retention without altering the rack connector.
-
How is a redundant arrangement checked around Yokogawa 0950-3017 PS605-0101?Record both supply positions, isolation devices and load-sharing indication before disturbing either path.
-
Which downstream information should be saved for Yokogawa 0950-3017 PS605-0101?Save the rack position, connected loads, protective-earth route and the normal power and fault indications.
-
What proves Yokogawa 0950-3017 PS605-0101 is ready for service?Stable rack power, normal controller startup, correct fault indication and unchanged downstream operation complete the acceptance check.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.