6ES7231-4HA30-0XB0

FAQS

• What is Siemens 6ES7231-4HA30-0XB0?
  The Siemens 6ES7231-4HA30-0XB0 is a SIMATIC S7-1200 SB 1231 analog input signal board with one channel configurable for +/-10 V DC at 12-bit resolution or 0 to 20 mA.
• What does 6ES7231-4HA30-0XB0 do in its Siemens system?
  It converts one analog voltage or current signal into a digital value for a compatible S7-1200 CPU without adding a separate side-mounted module. It is used with a correctly configured TIA Portal channel, suitable transducer or signal conditioner, and shielded analog wiring in compact measurement, machine monitoring, and process-control applications.
• Which signals or interfaces are documented for 6ES7231-4HA30-0XB0?
  Analog inputs: 1.
• Which components are compatible with 6ES7231-4HA30-0XB0?
  SIMATIC S7-1200 CPU supporting the SB 1231 signal board Voltage transducer within +/-10 V DC or current transmitter within 0 to 20 mA TIA Portal hardware configuration matching the selected input mode Shielded analog cable, reference potential, grounding, and loop supply specified for the signal.
• Where is 6ES7231-4HA30-0XB0 typically applied?
  Single-channel machine measurement: Adds one analog sensor without a side expansion module Voltage transducers: Digitizes a bipolar +/-10 V signal for control or monitoring Current-loop instruments: Acquires a 0 to 20 mA process signal Compact condition monitoring: Feeds pressure, position, load, or speed values to an S7-1200 CPU.
• What are the official weight and dimensions for 6ES7231-4HA30-0XB0?
  6ES7231-4HA30-0XB0 has a published net weight of 0.029 kg and 5.2 x 8.0 x 2.9 cm (Siemens packaging).
• What is the lifecycle status of 6ES7231-4HA30-0XB0?
  Siemens lists 6ES7231-4HA30-0XB0 as PM300 active, with product phase-out scheduled from 1 November 2026.
• What must be checked before installing 6ES7231-4HA30-0XB0?
  CPU support: Verify the exact S7-1200 CPU and signal-board slot compatibility Input mode: Configure either +/-10 V or 0 to 20 mA before connecting the signal Wiring: Check polarity, reference potential, shield termination, and loop supply Protection: Keep the applied voltage or current within the Siemens channel limits Commissioning: Validate raw value, engineering scaling, noise, open-circuit response, and alarms.