MEAN WELL SP-240-24 is an evidence-bounded 240 W single-output power supply with PFC. MEAN WELL's official SP-240 data sheet lists SP-240-24 exactly as the 24 V, 10 A member of the SP-240 series.
- Exact model: SP-240-24
- Rated output: 24 VDC, 10 A, 240 W
- Output adjustment: 20 to 28 VDC
- Input range: 88 to 264 VAC; 124 to 370 VDC
System role: It converts 88 to 264 VAC or 124 to 370 VDC input to a regulated 24 VDC output rated 10 A and 240 W. Only facts stated by the cited MEAN WELL material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Install it only as a component inside suitable end equipment with correct protective earthing, branch protection, ventilation and derating. The data sheet is a component specification; final equipment compliance and fan/thermal behavior must be validated in the installed enclosure. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete MEAN WELL SP-240-24 physical label and installed-system documentation before use.
Apter Power SP-240-24 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited MEAN WELL official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current MEAN WELL documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for MEAN WELL SP-240-24.
System documentationProvides a source-traceable boundary for the documented SP-240 enclosed power-supply series configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact MEAN WELL documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete MEAN WELL SP-240-24 label, revision and installed-system documentation before use.
2The data sheet is a component specification; final equipment compliance and fan/thermal behavior must be validated in the installed enclosure.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
