Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for KUAX671-671.022.16
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include KUAX671-671.022.16 and any series, revision or assembly markings. Keep the complete reference on your enquiry and quotation.
-
Check the offered item before ordering
Request current KUAX671-671.022.16 label, encoder-connector and output-terminal photos. Have your maintenance team compare the 671.022.16 execution, encoder arrangement and cam-output wiring with the installed controller and applicable Kuhnke instructions.
Technical specifications for KUAX671-671.022.16
-
Manufacturer:KUHNKE
-
Product Category:General Automation
-
Spare Part Number:KUAX671-671.022.16
-
Weight:0.5 kg
-
Tariff Code:8537101190
-
Product series:PosiControl KUAX 671
-
Controller order code:671.022.16
-
Nominal supply:24 V DC, ±20%
-
Permitted supply ripple:Less than 5%
-
Cam outputs:14
-
Status outputs:Two: A00 and A01
-
Output configuration:Positive-switching open-emitter
-
Output rating:24 V; 0.4 A per output
-
Encoder input:Optically isolated 24 V absolute-encoder signals
-
Encoder coding:Modified Gray code
-
Programming interface:9-pin D-sub
-
Encoder connector:25-pin D-sub
-
Operating temperature:0 to 55 °C
-
Controller protection:IP20
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- KUHNKE KUAX671-671.022.16 converts the configured absolute-encoder position into programmed cam-output states.
Product type: Electronic cam controller
Order-code identity: 671.022.16
Switching channels: 14 cam outputs plus two status outputs
Encoder system: 24 V modified-Gray absolute encoder
Order-code identity: 671.022.16
Switching channels: 14 cam outputs plus two status outputs
Encoder system: 24 V modified-Gray absolute encoder
KUHNKE KUAX671-671.022.16 is a PosiControl electronic cam controller that converts absolute shaft position into programmed switching outputs. The 671.022.16 execution provides 14 cam outputs and two status outputs, supporting position-dependent machine sequencing and cyclic timing functions. It uses optically isolated 24 V absolute-encoder signals with modified Gray coding. Encoder resolution, direction, shaft reference and programmed switching angles together determine the relationship between machine motion and each cam output.
The controller uses a 24 V DC supply with ±20% tolerance and a permitted ripple below 5%. Its positive-switching outputs are rated at 24 V and 0.4 A per output. A 25-pin D-sub connection serves the encoder and a 9-pin D-sub interface supports programming.
Status output A00 reports output-short-circuit or program-parity faults, while A01 monitors battery voltage. These diagnostic functions help distinguish a control or wiring problem from normal cam operation; the offered execution and stored program must match the installed machine.
The controller uses a 24 V DC supply with ±20% tolerance and a permitted ripple below 5%. Its positive-switching outputs are rated at 24 V and 0.4 A per output. A 25-pin D-sub connection serves the encoder and a 9-pin D-sub interface supports programming.
Status output A00 reports output-short-circuit or program-parity faults, while A01 monitors battery voltage. These diagnostic functions help distinguish a control or wiring problem from normal cam operation; the offered execution and stored program must match the installed machine.
Controller platform reference: Kuhnke PosiControl KUAX 671. Match the installed configuration and interfaces.
Technical downloads for KUHNKE KUAX671-671.022.16: original technical-reference excerpt and an Apter Power installation and commissioning guide.
-
KUHNKE KUAX671-671.022.16 technical reference
Original manufacturer excerpt. The 671.022.16 execution has 14 cam and two status outputs. Encoder coding, resolution and programmed switching angles must match the installed machine; other KUAX variants are not interchangeable by family name alone. PDF, 5 pages, 624.3 KB. -
KUHNKE KUAX671-671.022.16 installation guide
Prepared by Apter Power. Product identification, configuration checks, installation preparation and functional acceptance. PDF, 5 pages, 26.5 KB.
The technical reference preserves selected manufacturer pages. The installation guide is compiled by Apter Power for preparation and review; apply the original operating procedures and site controls during work.
System and configuration context: The 671.022.16 execution has 14 cam and two status outputs. Encoder coding, resolution and programmed switching angles must match the installed machine; other KUAX variants are not interchangeable by family name alone.
Application scope: The following describe engineering uses of this product. Match the installed interfaces, operating conditions and intended control function before integration or replacement.
Application scope: The following describe engineering uses of this product. Match the installed interfaces, operating conditions and intended control function before integration or replacement.
-
Position-dependent sequencing
Switch configured cam outputs according to machine-shaft position. Match encoder resolution, direction and the programmed switching angles. -
Packaging machine timing
Coordinate position-related machine actions with the configured cam program. Validate the output load and mechanical timing independently. -
Cyclic machine control
Use an absolute-position input for repeatable switching within a machine cycle. Confirm the installed encoder and reference alignment. -
Legacy controller servicing
Preserve the cam program, encoder configuration and output wiring when maintaining a KUAX 671 installation. Compare the 671.022.16 execution explicitly.
Match KUAX671-671.022.16 to the installed hardware and approved configuration before replacement or commissioning.
Match the 671.022.16 execution
Retain the complete KUAX671-671.022.16 identity and verify the 14 cam plus two status-output arrangement.
Verify encoder coding
Use the specified 24 V modified-Gray absolute-encoder interface and the configured resolution. Do not connect an incremental encoder by connector similarity.
Check output loading
Observe the positive-switching 24 V, 0.4 A output rating and the applicable external protection arrangement.
Preserve the cam program
Back up or record switching angles, program selection and shaft reference before maintenance or programming changes.
Interpret status outputs
A00 reports output short-circuit or program-parity faults; A01 monitors battery voltage. Diagnose the indicated cause before release.
Validate angular timing
Check encoder direction, reference and each required output transition under controlled machine conditions before production.
Alternative Names
KUAX671-671.022.16
Technical notes
System relationship: Preserve encoder type, modified-Gray coding, resolution, direction and shaft reference before reconnecting the controller.
Configuration boundary: The 671.022.16 execution has 14 cam and two status outputs. Encoder coding, resolution and programmed switching angles must match the installed machine; other KUAX variants are not interchangeable by family name alone.
Technical reference: Kuhnke Electronics PosiControl KUAX 671 Instruction Manual, E165GB (12 May 1993), including the 671.022.16 execution.
FAQ View All FAQ
-
What function does KUAX671-671.022.16 perform?It is a PosiControl electronic cam controller for position-dependent machine switching using an absolute-encoder input and a programmed cam arrangement.
-
How many cam outputs does KUAX671-671.022.16 provide?The 671.022.16 execution provides 14 cam outputs and two separate status outputs, A00 and A01.
-
What supply is required for KUAX671-671.022.16?Use 24 V DC within ±20%, with supply ripple below 5%. Include connected output loads separately in the power budget.
-
What encoder interface applies to KUAX671-671.022.16?It uses optically isolated 24 V absolute-encoder signals with modified Gray coding. Match the configured resolution and encoder wiring.
-
What output type does KUAX671-671.022.16 use?The outputs are positive-switching open-emitter outputs rated at 24 V and 0.4 A per output. The external load and protection must match this arrangement.
-
How does KUAX671-671.022.16 respond to an output short circuit?For the 671.022.16 execution, the affected output is switched off individually. Investigate the load or wiring fault and the A00 status indication.
-
What do the status outputs on KUAX671-671.022.16 indicate?A00 reports an output short circuit or program-parity fault. A01 monitors the backup battery and switches off when battery voltage falls below 3.4 V.
-
Which connectors are used on KUAX671-671.022.16?The encoder connection is a 25-pin D-sub and the programming interface is a 9-pin D-sub. Use the correct pin assignment rather than a generic serial or encoder cable.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.