Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for CC-PFB802 51454953-176
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for CC-PFB802 51454953-176
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:CC-PFB802 51454953-176
-
Estimated shipping dimensions:7.2×16×14.8cm
-
Weight:0.56 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Model:CC-PFB802
-
Secondary Part Number:51454953-176
-
Product Type:FOUNDATION Fieldbus interface module
-
Module Name:FIM8
-
H1 Segments:8
-
C300 Capacity:8 I/O units
-
Replaces:CC-PFB801
Information
Overview
Manuals
Common Applications
Product Precautions
CC-PFB802 51454953-176 is the controller-side FIM8 through which configured FOUNDATION Fieldbus devices, function blocks and strategies are brought into an Experion project.
- Concentrates eight H1 networks at one Fieldbus interface
- Carries field-device data into the assigned control strategy
- Preserves segment organization for configuration and diagnostics
- Supports documented migration from earlier CC-PFB801 hardware
For capacity planning, Honeywell counts the FIM8 as eight I/O units in a C300 configuration. The cabinet assignment must therefore agree with both the network layout and the controller resource plan.
Before exchange, export the live configuration and map every segment, device and control block. After download, confirm communication and loop behavior one segment at a time.
Important Notice: A migration is acceptable only when the Experion release supports the replacement hardware and the recovered project contains the approved Fieldbus database.
Honeywell CC-PFB802 51454953-176 Manuals & Downloads
CC-PFB802 51454953-176 Technical Reference (PDF)CC-PFB802 51454953-176 Installation & Commissioning Guide (PDF)
Important Notice: The Technical Reference covers FIM8 identity, segment count and controller capacity; the Installation & Commissioning Guide addresses project backup, migration, configuration loading and segment-by-segment acceptance.
Experion Fieldbus integrationConnect approved FOUNDATION Fieldbus H1 segments to the configured Experion controller architecture.
Multi-segment field networkOrganize field devices across eight documented H1 segment interfaces.
C300 control strategyUse the FIM8 within the verified C300 capacity and loaded control-strategy design.
FIM8 migrationReplace earlier CC-PFB801 hardware only after the release, segment and project migration records are verified.
Confirm the complete CC-PFB802 51454953-176 identity, Experion release, controller architecture, H1 segment design and approved Fieldbus configuration before replacement or commissioning.
1Record the complete CC-PFB802 51454953-176 identity before removal.
2Verify the installed Experion release and approved controller architecture.
3Back up the controller and Fieldbus configuration before replacement.
4Map all eight H1 segments and their connected field devices.
5Preserve Fieldbus points, function blocks and control-strategy assignments.
6Check controller capacity accounting for the eight FIM8 I/O units.
7Load the approved configuration and verify segment communication.
8Test affected loops and record final diagnostics before release.
Technical notes
Confirm the complete CC-PFB802 51454953-176 identity, Experion release, controller architecture, eight H1 segment assignments and approved Fieldbus configuration. Back up the controller, preserve Fieldbus points and strategies, then verify all affected loops before release.
FAQ View All FAQ
-
What is Honeywell CC-PFB802?Honeywell identifies CC-PFB802 as the FIM8, an eight-segment FOUNDATION Fieldbus interface module.
-
How many H1 segments does the FIM8 provide?The FIM8 designation and Honeywell documentation identify eight FOUNDATION Fieldbus segments.
-
Which earlier FIM8 hardware does CC-PFB802 replace?Honeywell released CC-PFB802 as the replacement for the earlier CC-PFB801 FIM8.
-
How is FIM8 counted in the C300 capacity table?Honeywell's C300 controller-capacity table assigns eight I/O units to a FIM8.
-
Which controller configurations are covered in Honeywell FIM8 training?Honeywell training material covers FIM8 and H1 network configuration with C200, C200E and C300 controller architectures.
-
What must be preserved during a module replacement?Preserve the cabinet assignment, H1 segment map, devices, Fieldbus points, function blocks, control strategies and approved controller resource allocation.
-
Why must the Experion release be verified before substituting older FIM8 hardware?Honeywell distinguishes the released CC-PFB802 replacement from earlier CC-PFB801 hardware and notes release-related limits for older parts, so the installed release and migration record are part of the acceptance boundary.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.