Which station hardware must be paired with IC670ALG320?

Use IC670ALG320 with the documented Field Control terminal block, compatible BIU or MFP, and the installed 20 to 29 v dc loop supply.

Which IC670ALG320 identity should be checked before installation?

Confirm the full IC670ALG320 catalog marking and the catalog number value IC670ALG320 against the installed station record.

Can IC670ALG320 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG320, its terminal assignment, data allocation, signal type, power arrangement, and the documented biu current value 51 mA maximum before migration.

GE IC670ALG320 GE Fanuc four-channel current/voltage analog output module

Name: IC670ALG320
Brand: General Electric
SKU: IC670ALG320

IC670ALG320

GE Fanuc four-channel current/voltage analog output module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670ALG320

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670ALG320

Estimated shipping dimensions:

5.3x8.5x8.1cm

Weight:

0.25 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Output channels:

Current ranges:

4 to 20 mA; 0 to 20 mA with jumper

Voltage ranges:

0 to 10 V; 0 to 12.5 V with jumper

Analog output data:

4 words; 8 bytes

Power-supply range:

20 to 29 V DC; 5% maximum ripple

Standby current:

80 mA typical

Maximum operating current:

180 mA including loop current

Power dissipation:

1.5 W minimum; 4.3 W maximum

Typical digital resolution:

12 bits

Voltage-only dummy load:

250 to 800 ohm for open-wire supervision

Isolation:

250 V AC continuous; 1500 V AC for 1 minute

BIU current:

51 mA maximum

Information

Overview Manuals Common Applications Product Precautions

GE IC670ALG320 is ge fanuc four-channel current/voltage analog output module. It generates simultaneous current and voltage commands on four channels from Field Control analog-output data.

Provides four simultaneous current and voltage channels
Selects 0-20 mA with a JMP-to-RET jumper
Pairs 4-20 mA with 0-10 V operation
Supports scaling and current-output open-wire diagnostics

IC670ALG320 operates with 20 to 29 V DC loop supply, Current or voltage field loads, JMP and RET range-selection terminals, Field Control BIU analog-output allocation.

Engineered applications include combined current and voltage command generation field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Match each JMP-to-RET jumper to its configured current range, verify common return and loop power, and disable or load unused current outputs when only voltage is used.

Apter Power IC670ALG320 Manuals and Guides

Apter Power IC670ALG320 Technical Data and System Reference PDF IC670ALG320 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

combined current and voltage command generation field station

Performs the documented combined current and voltage command generation function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670ALG320, its terminal assignment and the installed station configuration.

Verify the complete IC670ALG320 catalog marking and assigned Field Control position before work.

Place the connected combined current and voltage command generation process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670ALG320 terminal block.

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG320.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670ALG320?

IC670ALG320 is ge fanuc four-channel current/voltage analog output module. It generates simultaneous current and voltage commands on four channels from Field Control analog-output data.
Which station hardware must be paired with IC670ALG320?

Use IC670ALG320 with the documented Field Control terminal block, compatible BIU or MFP, and the installed 20 to 29 v dc loop supply.
Which IC670ALG320 identity should be checked before installation?

Confirm the full IC670ALG320 catalog marking and the catalog number value IC670ALG320 against the installed station record.
How should field wiring be transferred when replacing IC670ALG320?

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG320.
Which configuration item is critical when commissioning IC670ALG320?

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670ALG320?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670ALG320 signal path be functionally tested?

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.
Can IC670ALG320 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG320, its terminal assignment, data allocation, signal type, power arrangement, and the documented biu current value 51 mA maximum before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670ALG320

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670ALG320

Technical specifications for IC670ALG320

Information

Information