Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for ACC-5595-208
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for ACC-5595-208
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:ACC-5595-208
-
Estimated shipping dimensions:42.5×27×4.3cm
-
Weight:2.74 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Function:2 Gb/s Reflective Memory managed hub
-
Enclosure:19-inch 1U rack mount or desktop
-
Optical ports:8 multimode SFP transceivers
-
Ethernet:1 x 10BaseT
-
Serial interface:1 x RS-232
-
Power supply:Universal AC input
-
Network scale:Up to 256 nodes with cascaded hubs
Information
Overview
Manuals
Common Applications
Product Precautions
The ACC-5595-208 keeps a 5565 Reflective Memory ring available by regenerating optical traffic and bypassing a port when valid link conditions are lost.
- Uses a rack-mount or desktop enclosure with a universal AC power supply.
- Provides eight multimode small-form-factor pluggable optical transceivers in the -208 configuration.
- Offers one 10BaseT Ethernet interface and one RS-232 interface for monitoring and control.
- Supports cascaded hub arrangements for Reflective Memory networks with as many as 256 nodes.
Each populated optical port regenerates serial traffic while the managed bypass logic protects the remaining ring from a lost signal or invalid synchronization pattern.
Important Notice: Confirm the ACC-5595-208 suffix, eight multimode transceivers, optical-fiber type, enclosure installation, power input and retained management settings before replacement.
GE ACC-5595-208 Manuals & Downloads
GE ACC-5595-208 Technical Reference (PDF)GE ACC-5595-208 Installation & Commissioning Guide (PDF)
The technical reference consolidates product identity and interface data; the installation guide provides separate readiness, configuration, verification and handover checks.
Deterministic memory networks
Connects nodes in a 5565-family 2 Gb/s Reflective Memory ring.
Port fault isolation
Bypasses a disconnected or invalid optical path so other nodes can remain operational.
Signal regeneration
Refreshes the optical serial signal at each active hub port.
Local and remote management
Provides RS-232 and 10BaseT Ethernet access for documented hub monitoring and control.
Read the applicable product and site instructions before work. Verify ACC-5595-208, the installed host and every connected interface before isolation or replacement.
1
Confirm the complete ACC-5595-208 identity and all eight multimode SFP positions.
2
Record the optical ring direction, port order, active or bypass state and connected node at every port.
3
Capture Ethernet parameters, RS-232 settings and the current managed-bypass configuration.
4
Isolate AC power and protect every optical connector from dust and mechanical damage.
5
Retain rack hardware, airflow clearance and strain relief for each fiber path.
6
Restore transmit and receive fibers to the recorded ports without reversing ring direction.
7
Verify power, port signal and synchronization indications after the ring is re-energized.
8
Prove end-to-end Reflective Memory traffic and the intended bypass response before service release.
Technical notes
Confirm the complete ACC-5595-208 suffix, eight multimode transceivers, optical connector and fiber type, rack or desktop installation, supply input, Ethernet settings, RS-232 settings and current bypass configuration before replacement.
FAQ View All FAQ
-
What is GE ACC-5595-208 used for?It is a managed hub for 5565-family Reflective Memory networks, regenerating optical traffic and managing port bypass behavior.
-
Which enclosure format is used by GE ACC-5595-208?The -208 configuration is supplied for 19-inch 1U rack mounting or desktop use.
-
How many optical ports does GE ACC-5595-208 provide?It provides eight ports populated with multimode small-form-factor pluggable transceivers.
-
Which management interfaces are available on GE ACC-5595-208?The documented interfaces are one 10BaseT Ethernet port and one RS-232 serial port.
-
How does GE ACC-5595-208 handle a failed or disconnected node?The managed hub can bypass a port after detecting loss of signal or loss of valid synchronization patterns so the remaining ring can continue operating.
-
Can GE ACC-5595-208 be cascaded with other hubs?Yes. The documented architecture supports cascaded hub assemblies for Reflective Memory networks containing up to 256 nodes.
-
Which Reflective Memory family is GE ACC-5595-208 designed for?It is designed for the 5565 family of 2 Gb/s Reflective Memory products.
-
What should be checked before replacing GE ACC-5595-208?Confirm the complete -208 suffix, eight multimode transceivers, optical connector and fiber type, rack or desktop installation, supply input, Ethernet settings, RS-232 settings and current bypass configuration.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.