Which installed hardware must be paired with PR6423-010-000?

Use PR6423-010-000 with the documented Emerson PR6423 8 mm eddy-current measurement system components: PR6423-configured CON021 or CON041, M10 x 1 mounting bracket, Conductive shaft target.

How should the Sensor family value for PR6423-010-000 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6423.

What connection detail is critical when installing PR6423-010-000?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing PR6423-010-000?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can PR6423-010-000 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6423 8 mm eddy-current measurement system configuration.

PR6423-010-000 PR6423 8 mm eddy-current displacement sensor

Name: PR6423-010-000
Brand: Emerson
SKU: PR6423-010-000

PR6423-010-000

PR6423 8 mm eddy-current displacement sensor

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for PR6423-010-000

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

PR6423-010-000

Estimated shipping dimensions:

16x15x4cm

Weight:

0.3 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Sensor family:

PR6423

Sleeve thread:

M10 x 1

Armor:

Yes

Probe length Cx:

25 mm

Overall sensor length C:

34 mm

Adapter plug:

Included

Total cable length:

4 m

Cable end:

LEMO

Static nominal range:

+/-1.0 mm

Recommended dynamic range:

50 to 500 um p-p

Sensitivity:

8 V/mm

Nominal distance center:

Approximately 1.5 mm

Basic air gap:

0.4 to 0.7 mm

Operating temperature:

-35 to +180 degC; +200 degC short term

Pressure at sensor head:

10,000 hPa

Vibration endurance:

5 g at 60 Hz

Information

Overview Manuals Common Applications Product Precautions

Emerson PR6423-010-000 is pr6423 8 mm eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.

Uses a compact 25 mm armored probe body
Includes a four-metre integral cable
Provides the PR6423 two-millimetre static span
Connects through the standard LEMO termination

PR6423-010-000 operates with PR6423-configured CON021 or CON041, M10 x 1 mounting bracket, Conductive shaft target, Compatible vibration or position monitor.

Engineered applications include Compact bearing radial vibration, Short-bracket thrust position, Pump shaft centerline monitoring, Eccentricity channels.

Important Notice: Verify the compact 25 mm body clearance, M10 x 1 thread, armored four-metre cable and PR6423 converter calibration before setting the operating gap.

Apter Power PR6423-010-000 Manuals and Guides

Apter Power PR6423-010-000 Measurement-System Technical Reference PDF Apter Power PR6423-010-000 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Compact bearing radial vibration

Fits compact bracket spaces while retaining PR6423 measurement behavior.

Short-bracket thrust position

Monitors axial movement at short probe mounting points.

Pump shaft centerline monitoring

Supports non-contact journal-position trending.

Eccentricity channels

Measures slow-roll shaft bow with a protected lead.

Read the applicable Emerson machinery-monitoring instructions before work. Verify PR6423-010-000 and the installed Emerson PR6423 8 mm eddy-current measurement system configuration.

Verify the complete PR6423-010-000 order code, M10 x 1 mounting interface and assigned PR6423 8 mm eddy-current system measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing PR6423-010-000.

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.

Route the 4 m sensor lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep the LEMO or open-end connection clean, dry and fully identified before reconnecting the measurement loop.

Confirm the paired signal converter or monitor input, cable length and target material match the documented measuring chain.

Set the static gap within the documented linear region while preserving shaft and probe mechanical clearance.

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.

FAQS

What measurement or system function does PR6423-010-000 perform?

PR6423-010-000 is a pr6423 8 mm eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.
Which installed hardware must be paired with PR6423-010-000?

Use PR6423-010-000 with the documented Emerson PR6423 8 mm eddy-current measurement system components: PR6423-configured CON021 or CON041, M10 x 1 mounting bracket, Conductive shaft target.
How should the Sensor family value for PR6423-010-000 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6423.
What connection detail is critical when installing PR6423-010-000?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is PR6423-010-000 mechanically installed without changing measurement behavior?

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.
What commissioning test should be completed for PR6423-010-000?

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.
What configuration record should be retained when replacing PR6423-010-000?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can PR6423-010-000 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6423 8 mm eddy-current measurement system configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

PR6423-010-000

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for PR6423-010-000

Technical specifications for PR6423-010-000

Information

Information