Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for CB2W100-032
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for CB2W100-032
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:CB2W100-032
-
Estimated shipping dimensions:34x33x5cm
-
Weight:1.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Cable Type:20 AWG, twisted pair, shielded
-
Length:32 feet (9.75 meters)
-
Connector:MIL-C 5015, 2-socket, splash-proof, premium to blunt cut
-
Included Hardware:Locking ring, adapter seal, and O-ring
Information
Overview
Manuals
Common Applications
Product Precautions
The CB2W100-032 is a 2-wire transducer interconnect cable designed for industrial vibration and velocity monitoring systems.
- Oil and Wear-Resistant Outer Protective Jacket
- Two-Wire Simplified Signal Field Wiring
- Direct Compatibility with Velomitor Series Sensors
The CB2W100-032 contains two twisted insulated conductors surrounded by an overall aluminized polyester shield and a tinned copper drain wire. This construction maintains signal integrity by grounding induced electrostatic fields and preventing external electromagnetic interference along the 32-foot transmission path to the machine protection system.
The CB2W100-032 cable can be used to route signals from Velomitor sensors into Bently Nevada 2300 Vibration Monitors to support their 2-channel continuous vibration monitoring and protection capabilities.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada CB2W100-032 Interconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power Generation
Used to connect vibration sensors on steam turbines and large boiler feedwater pumps to monitor high-speed rotor vibrations and prevent blade failures.
Wind Power Generation
Applied in wind turbine nacelles to monitor the vibrations of gearboxes, main shafts, and generators, transmitting critical health data under harsh high-altitude wind conditions.
Hydroelectric Power Generation
Monitors the radial and axial vibrations of hydro-generator shafts to assess the impact of hydraulic forces on turbine stability.
Oil & Gas Extraction
Installed on reciprocating compressors and mud pumps on offshore drilling platforms or onshore oil wells, ensuring reliable signal connections in oily and humid environments.
Petrochemical & Refining
Used for bearing vibration monitoring of centrifugal compressors, cracked gas compressors, and large agitators in hazardous areas, with its sealed structure resisting chemical corrosion.
Iron & Steel Metallurgy
Utilized in condition monitoring for blast furnace blowers, hot rolling mill bearings, and large exhaust fans, capable of withstanding the high-temperature radiation typical of steel plants.
When using the CB2W100-032, maintain a bend radius of 6–8 times the outer diameter to avoid internal damage, and route it away from high-voltage cables to eliminate EMI. Ensure the aviation plug's guide pin is aligned and properly tightened for a perfect O-ring seal, and apply metal armor conduits for extra protection in severe water, dust, or abrasive environments.
Technical notes
CB2W100-032 terminates on the instrument end with stripped, pre-tinned flying leads, allowing connection to standard screw or spring-cage terminal blocks. The molded 2-pin connector assembly provides mechanical strain relief and prevents moisture ingress at the transducer interface under continuous industrial vibration.
FAQ View All FAQ
-
What is the CB2W100-032?It is a Bently Nevada 2-wire transducer interconnect cable.
-
What is the length of the CB2W100-032?ts nominal length is 32 feet.
-
How to use the CB2W100-032?Connect one end to the field 2-wire velocity sensor and the other end to the monitoring system terminals.
-
What type of connector does the CB2W100-032 have?It features a standard MIL-C-5015 2-pin splash-proof connector.
-
Do you offer global delivery services?Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
-
How many parts do you have in stock?We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.