330905-0-25-05-02-IN

FAQS

• How should the 250 mm body of 330905-0-25-05-02-IN be supported?
  Provide alignment and mechanical support that avoids bending load on the long M10 x 1 case.
• What probe-thread engagement is allowed for 330905-0-25-05-02-IN?
  The M10 x 1 probe thread may engage no more than 15 mm.
• Which torque is recommended when securing 330905-0-25-05-02-IN?
  Use 11.3 N m as the recommended M10 x 1 probe torque and stay below 33.9 N m.
• Does connector code 02 on 330905-0-25-05-02-IN provide a protective cap?
  No. It is the standard ClickLoc connector without protector, so keep the end clean and protected by the installation process.
• Which extension lengths can complete 330905-0-25-05-02-IN as a standard NSv loop?
  A 4.5 m or 6.5 m matching NSv extension cable completes the 0.5 m probe lead to a 5 m or 7 m system.
• What must be checked for the IN suffix on 330905-0-25-05-02-IN?
  Verify the country-specific approval marking and the current installation requirements; do not infer an approval from the suffix alone.
• What voltage span is expected across the linear range of 330905-0-25-05-02-IN?
  The matched NSv system is approximately -1 to -13 V over its published 1.5 mm linear range.
• Why is target geometry critical for 330905-0-25-05-02-IN?
  The published scale factor assumes the specified 4140-steel target size and geometry; other materials or shapes can change response.