330101-02-60-05-01-05

FAQS

• What engineering function does 330101-02-60-05-01-05 perform in its monitoring loop?
  330101-02-60-05-01-05 detects the changing gap between its probe tip and a conductive rotating target. The matched Proximitor Sensor converts this eddy-current response into a voltage used for static position and dynamic vibration channels.
• Which probe diameter applies to 330101-02-60-05-01-05?
  The configured probe diameter for 330101-02-60-05-01-05 is 8.0 mm.
• What case thread must be checked when specifying 330101-02-60-05-01-05?
  Use 3/8-24 UNF-2A for the case thread when reviewing this complete model.
• How does the unthreaded length selection affect 330101-02-60-05-01-05?
  This configuration identifies unthreaded length as 0.2 in; include that value in the installation record.
• Which case length is associated with 330101-02-60-05-01-05?
  The technical value is 6.0 in for the case length of this model.
• What companion hardware should be confirmed for 330101-02-60-05-01-05?
  Confirm matched bently nevada proximitor sensor, compatible extension cable selected for total system length, threaded mounting bracket or machine probe boss.
• What is the first commissioning check for 330101-02-60-05-01-05?
  Use the 0.2 in unthreaded length when checking how much of the probe case can engage the mounting bracket.
• Where is 330101-02-60-05-01-05 applied and what signal behavior should the engineer verify?
  It supports compact machine interfaces where the 6.0 in case and a short 0.5 m lead suit the available bracket and conduit layout. Verify a stable response at the configured monitoring input before releasing the channel.