Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330910-00-24-10-01-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330910-00-24-10-01-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330910-00-24-10-01-CN
-
Estimated shipping dimensions:1.7x1.5x115cm
-
Weight:0.15 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe thread:M10 x 1
-
Armor:Flexible stainless steel
-
Unthreaded length:0 mm
-
Overall case length:240 mm
-
Total length:1.0 m
-
Connector option:Standard ClickLoc with protector
-
Country option:CN
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330910-00-24-10-01-CN is an armored M10 x 1 NSv probe with 0 mm unthreaded length, 240 mm case, 1.0 m total length and a protected standard ClickLoc connector. Its CN ending is a country-specific ordering option in the manufacturer approval guide.
- Armored M10 x 1 NSv probe
- Long 240 mm fully threaded case
- Protected ClickLoc connection
- Country-specific CN configuration
Provide straight mechanical support for the long 240 mm case of 330910-00-24-10-01-CN and avoid transferring armor loads into the probe thread. Verify the CN marking, matched system length and installed monitor response before release.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330910-00-24-10-01-CN Manuals and Guides
Apter Power 330910-00-24-10-01-CN Product Technical ReferenceBently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Long-reach probe bracket
Provides a supported metric case for deeper mounting arrangements.
Harsh-route shaft sensing
Uses cable armor for mechanically exposed probe routing.
Speed and phase reference
Supports tachometer or Keyphasor use within a matched loop.
CN-suffix installed-base service
Preserves the exact country-option identity during replacement.
Read the applicable Bently Nevada documentation before work. Verify 330910-00-24-10-01-CN from the physical marking and the installed system record.
1
Verify the full 330910-00-24-10-01-CN marking and approval label.
2
Support the 240 mm case and keep the target end correctly aligned.
3
Limit M10 x 1 thread engagement to 15 mm and use the published torque.
4
Route the flexible armor without twist, crushing or sharp bends.
5
Keep the connector protector installed until the mating connection is ready.
6
Confirm the one-metre lead and extension cable match the NSv sensor length.
7
Check that the CN option satisfies the actual location and current approval requirements.
8
Complete gap, diagnostic, dynamic-response and documentation checks before return to service.
Technical notes
Provide straight mechanical support for the long 240 mm case of 330910-00-24-10-01-CN and avoid transferring armor loads into the probe thread. Verify the CN marking, matched system length and installed monitor response before release.
FAQ View All FAQ
-
Why does 330910-00-24-10-01-CN need added case support?Its ordered case is 240 mm long, so mounting must avoid bending load and preserve target alignment.
-
Which thread and torque table apply to 330910-00-24-10-01-CN?Use the M10 x 1 values: 11.3 N m recommended probe torque and 33.9 N m maximum.
-
What does unthreaded code 00 mean for 330910-00-24-10-01-CN?It specifies 0 mm unthreaded length, making the ordered 240 mm case fully threaded.
-
How is the cable of 330910-00-24-10-01-CN mechanically protected?The 330910 construction includes flexible stainless-steel armor.
-
Is a ClickLoc protector supplied with 330910-00-24-10-01-CN?Yes. Connector option 01 includes the standard connector protector.
-
What must be retained for the CN status of 330910-00-24-10-01-CN?Retain the complete marking and verify the country-specific option against the installed approval requirement.
-
What is the normal NSv linear span for 330910-00-24-10-01-CN?The matched system provides a published 1.5 mm linear range with a 1.0 mm recommended gap.
-
How must 330910-00-24-10-01-CN be accepted after startup?Confirm static gap, dynamic response and the configured alarm or protection-channel behavior under controlled conditions.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.