With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330880-16-00-021-03-02 is an English-unit PROXPAC XL proximity transducer assembly. It combines a 3300 XL 8 mm probe without approvals with an integrated Proximitor sensor housing. This configuration specifies no standoff adapter, 2.1-inch probe penetration, NPT fittings and a 3/4-14 NPT mounting thread.
High-quality fluoropolymer jacket
Specially tuned for 3300 XL NSv compact systems
Equipped with ClickLoc miniature coaxial connectors
The self-contained PROXPAC XL design eliminates the separate extension cable normally required between a probe and its Proximitor sensor. The housing is designed for Type 4X and IP66 environments.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330880-16-00-021-03-02 PROXPAC XL Assembly Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power Generation
It connects NSv probes installed inside small-diameter steam turbines, transmitting radial vibration signals to the cabinet Proximitor.
Nuclear Power Generation
It routes high-frequency coaxial signals from combined temperature and mechanical displacement probes within restricted installation spaces.
Hydroelectric Power
It extends dynamic displacement signals from the miniature governor linkages of high-speed hydro-turbine units to front-end conditioning modules.
Petroleum & Petrochemical Refining
It operates in dense oil and gas environments to connect NSv probes on high-speed centrifugal compressors, resisting lubricant and solvent erosion.
Iron, Steel & Metallurgy
It captures axial displacement from the input shafts of Top Gas Recovery Turbine (TRT) miniature hydraulic cylinders while resisting EMI.
Mining & Mineral Processing
It extends transmission distances for speed and vibration probes at the tail end of high-voltage motors without signal distortion.
Routing must strictly comply with minimum bend radius limits, avoiding excessive pulling or friction against sharp enclosure edges to prevent damaging the coaxial shield.
Once connected, the ClickLoc miniature connector must be wrapped with self-fusing tape for sealing protection to block industrial oil and moisture ingress that causes signal drift. Additionally, this cable is only compatible with 3300 XL NSv system components; mixing it with standard 8mm transducer hardware is prohibited as it causes severe measurement linearity distortion.
The 330880-16-00-021-03-02 features a rugged physical seal and all-weather protection, allowing direct installation on the machine exterior to block onsite oil and moisture while maintaining stable signals for the internal probe and cable connectors. The -03-02 suffix specifies the mounting thread type and the conduit fitting/sealing configuration.
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
What is Bently Nevada 330880-16-00-021-03-02?
It is a PROXPAC XL proximity transducer assembly integrating a 3300 XL 8 mm probe with a Proximitor sensor housing.
Is 330880-16-00-021-03-02 an extension cable?ion length of the model belonging to 330880-16-00-021-03-02?
No. It is a self-contained PROXPAC XL transducer assembly. Its design eliminates the separate extension cable normally used between a probe and Proximitor sensor.
What does option 021 mean?
Option 021 specifies a nominal probe penetration of 2.1 inches, approximately 53 mm.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
