With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330180-X1-05 MOD：143416-02 is a core component of the 3300 XL 8mm proximity transducer system. Its primary function is to receive weak high-frequency electrical signals sensed by the proximity probe.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330180-X1-05 MOD：143416-02 Proximitor Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petroleum and Oil & Gas Refining
Monitors shaft vibration of stainless steel rotors in hydrocracker feed pumps, rich gas compressors, and FCCU axial blowers to prevent catastrophic failures of critical rotating machinery.
LNG and Cryogenic Processing
Since cryogenic environments utilize specialized stainless steel, this Proximitor monitors static displacement and axial positioning of LNG export pumps and BOG (Boil-Off Gas) compressor shafts.
Thermal Power Generation
Monitors the dynamic balance and radial vibration of boiler feed pumps, turbine-driven ID fans, and high-pressure dust extraction fans, specifically for shafts with non-standard coatings or alloy compositions.
Nuclear Power Generation
Used in the conventional island area to monitor the mechanical state of main condensate pumps, main feedwater pumps, and auxiliary steam turbine shafts to ensure long-term continuous operation of nuclear power systems.
Gas Turbine Power Generation
Monitors shaft speed (Keyphasor) and axial displacement of heavy-duty gas turbines and axial compressors in combined-cycle power plants, where the custom calibration eliminates measurement errors caused by electrical runout on alloy shafts.
When connecting the miniature coaxial connector (ClickLoc) on the probe side, manually mate and lock the connection. Do not use mechanical tools (such as locking pliers) to over-tighten, preventing irreversible microscopic impedance damage to the inner metal center pin.
After mating, warp the junction with specialized oil-resistant self-fusing tape to block micro-lubricant oil mist from the machine bearing housing from corroding the connector.
The MOD number indicates that the internal calibration has been fine-tuned for specific non-standard target metals, such as particular grades of stainless steel, alloy steel, or chrome-moly steel. This ensures that the system maintains its factory-grade high linearity and precision when measuring these unique metal surfaces.
It is an industrial Proximitor sensor belonging to the Bently Nevada 3300 XL transducer system, primarily designed to process raw high-frequency signals from eddy current probes.
How does the 330180-X1-05 MOD: 143416-02 work?
It provides high-frequency electrical signals to the probe to generate an eddy current field, converting physical gap changes between the probe tip and the target metal into a proportional negative DC voltage signal.
What machinery parameters is the 330180-X1-05 MOD: 143416-02 suitable for measuring?
It is suitable for high-precision measurement of rotating machinery parameters including shaft vibration (dynamic), axial thrust position (static), and Keyphasor references (speed/eccentricity).
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
