Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330173-00-18-10-02-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330173-00-18-10-02-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330173-00-18-10-02-05
-
Estimated shipping dimensions:20.5×22.4×3.3cm
-
Weight:0.14 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product:3300 5 mm metric proximity probe
-
Thread:M8 x 1
-
Armor:Without armor
-
Unthreaded length:0 mm
-
Case length:180 mm
-
Total probe length:1.0 m
-
Connector:ClickLoc, no protector
-
Cable:Standard cable
-
Approval:05, multiple approvals
-
System linear range:1.5 mm
-
Recommended gap:About 1.0 mm
-
Probe-tip diameter:5.2 mm
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330173-00-18-10-02-05 is an M8 x 1 unarmored 3300 5 mm probe with 180 mm case and 1.0 m total probe length.
- M8 x 1 metric case
- 0 mm unthreaded length
- 180 mm case length
- 1.0 m standard cable
The probe senses shaft-to-bearing relative displacement in a matched 3300 5 mm transducer chain. Its cable length, connector, target, static gap and Proximitor Sensor selection are verified together.
Important Notice: Preserve the complete 330173-00-18-10-02-05 code and 5 mm matched-system record; do not substitute an 8 mm probe or infer the approval from the family name.
Bently Nevada 330173-00-18-10-02-05 Manuals & Downloads
Bently Nevada 330173-00-18-10-02-05 Manufacturer Datasheet Excerpt (PDF)Bently Nevada 330173-00-18-10-02-05 Installation & Commissioning Guide (PDF)
The manufacturer excerpt preserves selected original datasheet pages and is not the complete publication. The installation guide is an Apter Power field workflow for controlled restoration and commissioning.
Compact radial vibration
Measures non-contact shaft motion where the 5 mm tip geometry is required.
Axial position
Supports documented thrust-position measurement within the system range.
Metric probe mounting
Fits the engineered M8 x 1 mounting position.
Exact approved renewal
Restores the 330173-00-18-10-02-05 geometry and approval selection.
Bently Nevada 330173-00-18-10-02-05 installation checks: retain the exact identity, installed configuration and witnessed acceptance record throughout the work.
1
Verify the complete 330173-00-18-10-02-05 label and multiple-approval marking.
2
Record the installed 5 mm system length, gap and monitor configuration.
3
Protect the 5.2 mm tip and M8 x 1 thread from impact and contamination.
4
Confirm 0 mm unthreaded length and 180 mm case length before mounting.
5
Route the 1.0 m standard cable above its minimum bend radius.
6
Keep ClickLoc faces clean and join them finger tight without side load.
7
Set the static gap in the documented 5 mm system linear region.
8
Prove polarity, scale response and alarm action before release.
Technical notes
For 330173-00-18-10-02-05, retain the exact ordered suffix, installed measurement-chain record and witnessed acceptance result. Return the channel to service only after the model-specific electrical and mechanical checks pass.
FAQ View All FAQ
-
What sensing-system size is Bently Nevada 330173-00-18-10-02-05 designed for?Bently Nevada 330173-00-18-10-02-05 is the metric M8 x 1 probe for a 3300 5 mm proximity transducer system.
-
Which physical dimensions define the probe body of Bently Nevada 330173-00-18-10-02-05?It has a 5.2 mm probe tip, 0 mm unthreaded length and a 180 mm case.
-
Does Bently Nevada 330173-00-18-10-02-05 use an armored lead?No. Its ordered execution is without armor and uses the standard 1.0 m probe cable.
-
What connector-protection choice is fitted to Bently Nevada 330173-00-18-10-02-05?The 02 option provides a ClickLoc connector without a protector, so installed environmental protection must be handled separately.
-
Which approval selection accompanies Bently Nevada 330173-00-18-10-02-05?The ending 05 denotes the multiple-approvals option for this exact probe.
-
Where should Bently Nevada 330173-00-18-10-02-05 be positioned for its normal static setup?The recommended target gap is about 1.0 mm, established within the linear operating region of the matched 5 mm system.
-
What linear range is available from a correctly matched system using Bently Nevada 330173-00-18-10-02-05?The documented system linear range is 1.5 mm.
-
Why must Bently Nevada 330173-00-18-10-02-05 not be commissioned with 8 mm probe assumptions?Its M8 x 1 thread, 5.2 mm tip, 1.0 mm recommended gap and 1.5 mm linear range belong to the 3300 5 mm system, not the 3300 XL 8 mm geometry and performance.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.